„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Turbosound iQ15
| System | |
| Type | Powered Loudspeaker |
| Frequency response | 50 Hz – 18 kHz ±3 Db |
| 42 Hz – 20 kHz -10 dB | |
| Nominal dispersion | 75° H x 55° V @ -6 dB points |
| Maximum SPL | 132 dB peak |
| Crossover type | Active |
| Transducers | 1 x 15" (387 mm) LF driver |
| 1 x 1" (25.4 mm) HF compression driver | |
| Limiter | Independent HF, LF, peak and rms |
| Amplifier | |
| Maximum output power | 2,500 W |
| Type | Class-D |
| Protection | Short circuit, open circuit, thermal |
| Connectors | |
| Input A / B | 2 x combo jack/XLR |
| Sensitivity | Line +4 dBu, mic -22 dBu, switchable |
| Input impedance | 20 kO unbalanced, 40 kO balanced |
| Maximum input level | +21 dBu |
| Output A / B | 2 x XLR Linked to input |
| Mix output | XLR, balanced |
| Output impedance | 100 O unbalanced, 200 O balanced |
| Ultranet input/link | 2 x RJ45 |
| Mains Supply | Neutrik powerCON input 20A and link 15A |
| Controls | |
| DSP | 2 x gain controls (channels A and B) |
| 2 x Line/Mic switch | |
| Mixer section | 2 x gain controls (channels A and B) |
| 2 x Line/Mic switch | |
| User DSP Functions | |
| Factory EQ presets | Positioning, Sound mode, Sound modeling, FBQ |
| Display | LCD 128 x 32, blue backlit |
| Delay | 0 - 300 ms |
| Equalisation | High and low shelving EQ |
| 2 x parametric EQ | |
| Limiter | Zero attack input limiter |
| Presets | 20 total presets, 19 user-definable |
| Crossover | High Pass L-R 24 dB/oct |
| Protection | Lock-out function for all settings |
| Power Supply | |
| Power consumption | 150 W @ 1/8 max power |
| Enclosure | |
| Dimensions HWD | 711 x 450 x 381 mm (27.9 x 17.7 x 15.0") |
| Net weight | 26.1 kg (57 lbs) |
| Construction | Injection-moulded polypropylene enclosure |
| Finish | Black painted |
| Grille | Powder coated perforated steel |
| Flying hardware | M10 x 3 points |



