Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: VTC Pro Audio EL210
Specification | |
Type | Line Array Loudspeaker |
Configuration | Passive Bi-amplified (processor controlled) |
Driver Components (HF) | 80 watt, 16 ohm driver - 1.75" annular polyester diaphragm with 1" exit - Neodymium magnet assembly (x2) |
Driver Components (LF/MF) | 600 watt, 16 ohm 10" woofer w/ 2.5" voice coil Neodymium magnet assembly (x2) |
Frequency Response | 55Hz - 20kHz (with recommended DSP processing) |
Program Power | HF: 160 Watts |
LF: 1200 Watts | |
Nominal Impedance | HF: 8 ohms |
LF: 8 ohms | |
Sensitivity (1w/1m) | HF: 113dB (single cabinet measured in free space) |
LF: 98dB (single cabinet measured in free space) | |
Maximum SPL | HF: 136dB (single cabinet measured in free space) |
LF: 129dB (single cabinet measured in free space) | |
Nominal Coverage | Horizontal: 90° |
Vertical: 10° | |
Enclosure Material | 5/8" 11-ply Baltic birch plywood |
Finish | Black Ultrathane paint |
Grille | Perforated, formed powder coated steel |
Connectors | Neutrik Speakon® NL4 in parallel (x2) |
Pin Configuration (Biamp) | HF: +2/-2 |
LF: +1/-1 | |
Attachment Points | Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 0 ° to 10° |
Dimensions (DWH xbackW, cm) | 49.5 x 72.1 x 38.9 x 30.2 |
Weight (lbs/kg) | 89 / 40.5 |