Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Crown 160MA
Specification | |
Type | Four Input, 60W Mixer-Amplifier |
Frequency Response | (at 1 watt from line out): 50 Hz to 20 kHz +/-1 dB, 19 Hz to 34 kHz - 3 dB |
Signal to Noise Ratio | (ref. to rated power, master volume at minimum): Mic: > 58 dB, Line: > 60 dB, Telephone: > 60dB, Inputs 2 or 3: > 78 dB |
THD+Noise | < 0.5% at rated power at 1 kHz, < 0.1% at 5W at 1 kHz |
Input Sensitivity | (for full output at miximum gain): Input 1: Mic 3mV, Line 800 mV, Input 2: 400mV, Input 3: 400mV |
Input Impedance (nominal) | Mic: 2.2 kilohms, Line: 10 kilohms, RCA: 10 kilohms |
Crosstalk | -82 dB at 1 kHz (Ch. 1 line inpute 0.8V, Ch. 1 volume at minimum, other channel volumes at maximum) |
Line Output Level (nominal) | 1V into 10 kilohms |
Phantom Power | 15 VDC |
AC Line Voltages Available | Universal Power Supply. Line voltage tolerance +15%, -20% |
Operating Temperature/Humidity | 0 degrees C to 40 degrees C at 95% relative humidity (non-condensing) |
Storage Temperature | -20 degrees C to 85 degrees C |
IEC Power Connector | 15A |