Kategorie: Verstärker Röhrenverstärker


Ausstattungsliste: Luxman MQ-300


Ausstattung & technische Daten
Specification
Rated output 8W + 8W (4Ω, 8Ω,16Ω)
Input sensitivity 490mV (8Ω)
Input impedance 240kΩ
Frequency response 20Hz to 20kHz (+0.3,-1.5dB)
10Hz to 30kHz (+0.3, -3.0dB)
Total harmonic distortion 1% (1kHz, 8Ω, 1W)
S/N ratio (IHF-A) 105dB
Circuiting system Driver: Parallel connection two stage amplification Output: Single configuration, cathod-bias circuit Whole: Non-feedback amplification
Vacuum tubes 5AR4(SOVTEK) x 2
6SN7GTB(TUNG-SOL) x 4
TA-300B(Takatsuki) x 2
Power voltage 230V~(50Hz) / 115V~(60Hz)
Power consumption 190W
190W (at no input)
External dimensions 460(W) x 237(H) x 340(D) mm rear side terminal of 36mm included in depth
Net weight 29.0kg (main unit)
Accessories Power cable
Speaker terminal Supported Y-lug terminal dimension Width of part a: 16mm or less
Width of part b: 7mm or more
Connection may not be performed depending on the shape of the Y-lug terminal.
Neu im Shop

ePaper Jahres-Archive, z.B. Heimkino

ePaper Jahres-Archive, z.B. Heimkino
>> mehr erfahren
462_22882_2
Topthema: Feurig
Feurig_1706536121.jpg
High-End-Standbox mit ESS AMT

Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.

>> Mehr erfahren
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (englisch, PDF, 13.99 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 21.23 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 7.2 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (deutsch, PDF, 7 MB)
Interessante Links:
  • www.hausgeraete-test.de
  • www.heimwerker-test.de
  • hifitest.de/shop/
Allgemeine Händlersuche
Landkarte PLZ0 PLZ1 PLZ2 PLZ3 PLZ4 PLZ5 PLZ6 PLZ7 PLZ8 PLZ9

Klicken Sie auf Ihre PLZ oder wählen Sie ein Land

Händler des Tages

Musik&Akustik