Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Tonabnehmer
Ausstattungsliste: Goldring Ethos
Specification | |
Cantilever | Aluminium alloy |
Stylus profile | Vital line-contact |
Replacement stylus | Factory replaceable |
Frequency range | 10 Hz - 32 kHz |
Frequency response | ± 2 dB (35 Hz - 20 kHz) |
Channel balance | <1 dB at 1 kHz |
Channel separation | >30 dB at 1 kHz |
Sensitivity | 0.5 mV ± 1 dB @ 1 kHz, 5 cm/s (rms) |
Static compliance | 25 mm/N |
Dynamic compliance | 15 mm/N |
Vertical tracking angle | 20° |
Load resistance | 100 Ω |
Load capacitance | 100 - 1000 pF |
Internal inductance | 7.5 µH |
Internal resistance | 4 Ω |
Cartridge mass | 7.7 g |
Total mass (incl. fixings) | 8.5 g |
Fixing centres | 12.7 mm (0.5 in) |
Playing weight | 1.5 - 2.0 g (1.75 g) |
262-2250
hifisound Lautsprechervertrieb |