Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Röhrenverstärker
Ausstattungsliste: Jolida Fusion 1102
Specification | |
Rated Output Power | 20 W per channel at 8 ohms, 26Hz to 50KHz |
Maximum Power Output | 25 W per channel at 8 ohms, 1KHz |
Frequency Response | (at 1 watt into 8 ohms) 7Hz to 95KHz + 1dB; 0dB at 1KHz |
Bandwidth | 14Hz to 80KHz + 3dB; 0dB = 20 W 1KHz, 8 ohms |
Distortion THD + N | Less than 1% at 15W output, 39Hz to 10KHz, 8 ohms |
Circuit Type | Ultra Linear, Class AB1 |
Input Impedance | <= 250Kohms |
Input Sensitivity | Max. 800mV for 20 watt output at 1KHz |
Output Impedance | 4 ohms and 8 ohms |
Negative Feedback | Less than 5 dB |
Noise and Hum | 90 dB below rated output from 10Hz to 200Khz |
Tube Complement | 4 pieces Electro Harmonix EL84 power output tubes; 2 pcs. Electro Harmonix 12AT7A driver tubes, 1 pc. Tung Sol 12AX7 pre-amplifier tubes. |
Power Requirements | 110V-120 VAC 60Hz 90 watts-standby, (220-240 VAC 50Hz option. |
Dimensions | 12 inches wide by 8 inches deep by 5 inches high. |
Weight | 27 pounds net, approximately 31 pounds packaged |
Bias Settings | 200 millivolts +/- 20 millivolts |
Fuse | For 110/120 VAC: 4 amp slow blo, for 220/240 VAC: 3.15 amp slow blo, Size: 5mm X 20mm |