Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Röhrenverstärker
Ausstattungsliste: VAC Statement Line
Technical specification | |
Tubes | 2x 8416, 7308, 6922, E88CC, ECC88, 6DJ8, (or 12DJ8 twin triodes) |
Gain | 11 dB |
Inputs | 2 sets RCA line input |
3 sets balanced/RCA selectable inputs | |
1 set balanced/RCA cinema bypass input | |
Outputs | 2 sets RCA |
2 sets balanced XLR (EIA “pin 2 hot” studio standard) | |
Frequency Response | Flat over audio band –3 dB bandwidth 4 Hz-250 kHz |
THD | < 0.007% @ 1 kHz, 1 V RMS |
Maximum Input | Infinite signal (attenuation precedes the gain circuitry) |
Maximum Output | > 8 V RMS |
Output Impedance | < 150 ohms, 20 Hz - 20 kHz, static (i.e., not dependent upon feedback) |
Recommended Output Load | > 300 ohms |
Absolute Phase | Correct from all inputs to all outputs |
Power | External power supply, detachable umbilical cables |
Voltage | May be ordered for 100v, 120v, 220v, or 230/240v operation |
Illumination | Illuminated logo may be switched off. |
Remote | Included |
Cinema Bypass | Yes |
Finish | Hand-rubbed gold-flake gloss black lacquer with chrome knobs standard. |
Hand-rubbed metallic gloss silver lacquer with chrome knobs special order with additional cost. | |
Dimensions (H x W x D) | Audio chassis (not including knobs and connectors): 7 x 17.7 x 16.15 in. |
Power supply (not including connectors): 5.8 x 17.7 x 16.15 in. | |
Shipping Weight | Line stage chassis 56 lbs |
Power supply 64 lbs |