Mit integriertem MC-Phono-Vorverstärker und XLR-Anschlüsse für beste Klangqualität
>> Mehr erfahren>> Alle anzeigen
Mit der neuen 1610-Serie will Arendal die Tugenden der Top-Baureihen in bezahlbare Regionen bringen.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: Sunfire HRSIW8AMP
| Specification | |
| Amplifier Output | 520 watts rms into 4° |
| High Cut Filter | 40 Hz - 160 Hz adjustable, with an LFE bypass position |
| 12 - 36 dB/octave adjustable slope | |
| Frequency Response | 33 Hz - 150 Hz (-3 dB) |
| Power Line | VoltageUS model: 120 VAC 50/60 Hz |
| International model: 230 VAC 50/60 Hz | |
| Dimensions (H x W x D) | 1.75" (1U) x 19" x 11.2" |
| 44.5 mm x 482.6 mm x 284.5 mm | |
| Weight | 13.5 lb. (6.12 kg) |
| Output Levels | Greater than 106 dB peak SPL (includes room gain) Measurement is at 1 meter, anechoic |
| Total Harmonic Distortion (amplifier) | Less than 0.5% at 500W into 4° |
| Input Sensitivity (full output) | 23 mV rms at 38 Hz with volume control set to maximum |
| Input Impedance | 49 k° for Line-Level input |
| 20 k° for XLR input | |
| XLR Input | Pin 1 Ground |
| Pin 2 Positive | |
| Pin 3 Negative | |
| 12 VDC Trigger Input | Input voltage range 2.2 -13 VDC |
| Impedance approx 2800° (4.2 mA @ 12 V) 3.5 mm mono minijack, tip positive. | |


