Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein

Kategorie: Vollverstärker


Ausstattungsliste: Linn Majik-I


Ausstattung & technische Daten
Integrated amplifier
Technical Specifications
Date of Introduction October 2007
Type Integrated amplifier
Connector types
Headphones 3.5 mm jack
Aux input 3.5 mm jack
Line outputs RCA Phono
Tape outputs RCA Phono
Line inputs RCA Phono
Speaker outputs 4mm Banana / Binding Post
Input impedance
MM phono input 48 kΩ 68 pF
Line inputs 10 kΩ
Aux input 100 kΩ
Input voltage
MM phono input 70 mV peak @ 1 cm/sec 1kHz
Line inputs 8.5 V peak, 6 V rms
Aux input 4.5 V peak, 3.1 V rms
Phono stage gain
MM phono input +40 dB (x 100) @ 1 kHz
Output impedance
Line out 300 Ω
Tape out 300 Ω
Headphones 11 Ω
Output voltage
Line outputs 8.8 V peak, 6 V rms
Tape outputs 8.8 V peak, 6 V rms
Headphones 8.8 V peak, 6 V rms
Output offset
Line outputs < 2 mV
Tape outputs < 2 mV
Headphones < 2 mV
Speaker outputs < 3 mV
Signal-to-noise ratio
Line inputs Better than -120 dB
MM phono input Better than -90 dB
Gain range -80 dB to +20 dB
Gain resolution 0.5 dB
Unity gain volume 0 dB = volume 80
Dynamic range 120 dB
Damping factor Greater than 170
Signal level for clipping 755 mV rms
Harmonic distortion < 0.01%
Load tolerance Unconditionally stable into all loudspeaker loads
Frequency response
Pre-amp 2.5 Hz – 170 kHz (-3 dB)
Power amp 2.5 Hz – 48 kHz (-3 dB)
Speaker output voltage 28.8 V peak
Power consumption
Standby 20 W
Operational 30 W
Maximum continuous 300 W
Mains supply voltage (auto-ranging) 100 – 120 V ac (±10%) 50 – 60 Hz, 220 – 240 V ac (±10%) 50 – 60 Hz
Fuse replacement 250 V, T10 A
Dimensions (H) 80 mm x (W) 381 mm x (D) 355 mm (H) 31⁄8 inches x (W) 151⁄16 inches x (D) 14 inches
Weight 4.9 kg / 10.78 lb
Control 6 control keys on front panel Remote controllable (handset supplied)
Finishes Black and Silver