Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Wireless Aktivlautsprecher
Ausstattungsliste: Audioengine HD4
General specifications | |
Amplifier type | Dual class A/B monolithic |
Power output | 120W peak power total (30W RMS / 60W peak per channel), AES |
Drivers | 4″ Aramid fiber woofers, 3/4” silk dome tweeters |
Inputs | 3.5mm stereo mini-jack, USB, RCA L/R, Bluetooth - |
Outputs | Dual RCA variable line-out, 3.5mm mini-jack headphone output |
Input voltages | 110-240V 50/60Hz auto-switching |
SNR | >95dB (typical A-weighted) |
THD+N | <0.05% at all power settings |
Crosstalk | <50dB |
Frequency response | 60Hz-22kHz +/-1.5dB |
Input impedance | 5K ohms unbalanced |
Input bit depth | up to 24 bits native |
Input sample rate | 24-bit |
Protection | Output current limiting, thermal over-temperature, power on/off transient protection |
Bluetooth specifications | |
Internal D/A converter | PCM 5102 |
Bluetooth receiver type | Bluetooth 5.0 |
Supported codecs | aptX HD, aptX with very low latency, aptX, AAC, SBC |
Wireless operation range | Up to 100ft (30m) typical |
Input data rate | Determined by Bluetooth |
Wireless latency | ~30 milliseconds (ms) |
USB specifications | |
Connector type | Micro-USB |
USB device class | USB 1.1 or above |
Internal D/A converter | PCM 5102 |
Input bit depth | 24-bits |
Input sample rate | 44.1KHz/48KHz |
Headphone amp specifications | |
Headphone amp type | OPA2134 |
Full-scale headphone output level | 2.0V RMS |
Output impedance | 2 ohms |
Recommended headphone impedance range | 10 ohms to 10K ohms |
Weights and measures | |
Dimensions (each speaker HWD) | 9″(23cm) x 5.5″ (14cm) x 6.5″ (16.5cm) |
Weight (LEFT speaker powered) | 3.25kg/7.18lbs |
Weight (RIGHT speaker passive) | 2.42kg/5.35lbs |