Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: AV-Sonstiges
Ausstattungsliste: Crestron C2N-VEQ4
Typ | 4-Channel Volume/EQ Control Module |
Audio | |
Features | 4x4 Matrix Mixer, 4-Channel Digital Audio Processor |
Master Volume | -80dB to +20dB, 0.1dB steps (balanced I/O) |
Channel Volume | -80dB to +12dB, 0.1dB steps from Media Tools; -80dB to +0dB, 0.1dB steps from SIMPL (balanced I/O) |
Mute | > -100dB |
Bass/Treble Gain Range | ±15dB, 0.5dB steps |
Equalization Modes | 10-band graphic plus 2-band parametric; 5-band graphic plus 7-band parametric; speech-optimized 5-band graphic plus 7-band parametric; 3-band graphic plus 9-band parametric; or 12-band parametric |
PEQ Filter Gain ± | ±12dB, 0.1dB steps from Media Tools; +24/-36dB, 0.1dB steps from SIMPL |
PEQ Filter Bandwidth | 0.02 to 2.0 octaves (1.0 to 3.0 for shelving) from Media Tools; 0.02 to 3.5 from SIMPL |
PEQ Filter Center Frequency | 25Hz to 19.9kHz from Media Tools; 5Hz to 24KHz from SIMPL |
PEQ Filter Types | low pass, high pass, EQ filter (peaking/notching), bass shelf, and treble shelf |
GEQ Filter Gain | +5/-10dB, 0.1dB steps from Media Tools; ±10dB, 0.1dB steps from SIMPL |
GEQ Filter Center Frequencies | 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz (10-band); 63, 250, 1k, 4k, 10k Hz (5-band); 160, 600, 1k, 2.5k, 5k Hz (Speech Opt. 5-band); 250, 1k, 4k Hz (3-band) |
Frequency Response | ±0.1dB 20Hz to 22kHz, ±0.5dB 10Hz to 30kHz |
Total Harmonic Distortion (THD) + Noise | <0.008% @1kHz |
S/N Ratio | >97dB balanced, >95dB unbalanced, 20Hz to 22kHz A-weighted |
Crosstalk | > -90dB 20Hz to 22kHz |
Common Mode Rejection | >90dB 20Hz to 22kHz |
Connectors | |
IN 1 - 4 | (2) 5-pin 3.5mm detachable terminal blocks comprising (4) balanced/unbalanced line-level audio inputs; Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced; Input Impedance: 10k ohms balanced, 5k ohm unbalanced |
OUT 1 - 4 (2) | (2) 5-pin 3.5mm detachable terminal blocks comprising (4) balanced/unbalanced line-level audio outputs; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced; Output Impedance: 200 ohms balanced, 100 ohms unbalanced |
NET | (1) 4-pin 5mm detachable terminal block, Cresnet slave port; Connects to Cresnet control network |
G | (1) 6-32 screw, chassis ground lug |
Buttons | |
SETUP (rear) | Used for Touch-Settable ID (TSID) |
Power Requirements | |
Cresnet Power Usage | 8 Watts (0.34 Amps @ 24 Volts DC) |
Environmental | |
Temperature | 32° to 122°F (0° to 50°C) |
Humidity | 10% to 90% RH (non-condensing) |
Enclosure | |
Chassis | Steel, black matte powder coat finish |
Faceplate | Extruded aluminum, black matte powder coat finish with polycarbonate label overlay |
Mounting | Freestanding or 0.5U 19-inch rack-mountable (adhesive feet included, ST-RMK rack kit sold separately) |
Dimensions | |
Height | 1.80 in (4.57 cm); 1.70 in (4.32 cm) without feet |
Width | 7.07 in (17.96 cm) |
Depth | 6.38 in (16.21 cm) |
Weight | 1.86 lb (0.84 kg) |