Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigenKategorie: AV-Verstärker
Ausstattungsliste: Audiocontrol The Director® Model M4840
| INPUTS | |
| Inputs | 4 Stereo Analog Inputs, 4 Digital Combo Coax/Toslink Inputs |
| Input Sensitivity | 1 Vrms for full output, level at maximum |
| Input Gain | 30 dB |
| OUTPUTS | |
| Amplifier Channels | 8 |
| Power Output (8Ω) | 100W per channel |
| Power Output (4Ω) | 200W per channel |
| Power Output (8Ω Bridged Mono) | 400W |
| Minimum Speaker Load | 4Ω |
| Preamp Audio Outputs | 4 Stereo Loop Outputs, 2 Digital Coax Bus Outputs, 4 Digital Combo Coax/Toslink Loop Outputs |
| PERFORMANCE | |
| Crosstalk | > 80 dB @ 1 kHz |
| Damping Factor | >300 |
| Signal to Noise | >95 dB, A-wtd, ref full output |
| Crosstalk | > 80 dB @ 1 kHz |
| DAC Specifications | 32 – 96 kHz sample rate, 16/24 bit depth |
| CONTROL | |
| Remote Power Trigger | +12 VDC or Dry Contact Closure |
| Network Connection/Protocol | 10BaseT Ethernet TCP/IP |
| Communication Protocol | HTTP or Telnet |
| WEIGHTS & DIMENSIONS | |
| Dimensions | 17” W x 11.75” D x 3.5” H (2U) |
| Weight | 16.5 lbs (7.5 kg) |




