Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Car Hifi Endstufe Mono
Ausstattungsliste: Lightning Audio L-1250
| Specifications | |
| Number of Channels | 1 |
| Rated Power | 150 Watts RMS x 1 @ 4-Ohms |
| 250 Watts RMS x 1 @ 2-Ohms | |
| Max Power | 300 Watts RMS x 1 @ 4-Ohms |
| 500 Watts RMS x 1 @ 2-Ohms | |
| Efficiency (average) | >60 |
| Bridgeable | No |
| Crossover Controls | Low-Pass: Variable from 50Hz - 250Hz @ 12dB/Octave Butterworth |
| Infrasonic: 25Hz @ 24dB/Octave Butterworth | |
| Tone Controls | Variable on-board bass boost 0dB - 12dB @ 45Hz |
| Signal Input | Low-Level: 2 RCA (150mV to 4V) High-Level: 4-pin connector (300mV to 8V) |
| Signal Output | Low-Level: 2 RCA |
| Power Input Connector | Screw terminal |
| Power Wire Gauge | 4 AWG |
| Speaker Output Connector | Screw terminal |
| Speaker Wire Gauge | Up to 10 AWG |
| Heat Sink Type | Extruded aluminum |
| Cooling | Convection |
| Remote Control | Remote Level Control (included) |
| Visual Indicators | Power: Green |
| Thermal: Red | |
| Protect: Red | |
| Circuit Topology Class | CLASS-A/B |
| THD at Rated Power 4-Ohm: <1.0% 2-Ohm: <1.0% | 4-Ohm: <1.0% |
| 2-Ohm: <1.0% | |
| Frequency Response | 25Hz - 250Hz |
| Signal-to-Noise Ratio | >80 dB |
| Channel Separation | - |
| Shipping Weight | 6.25 Lbs. (2.83 Kg.) |
| Dimensions | L11.81" x W7.64" x H2.28" 30cm x 19.4cm x 5.8cm |





