
Verwandeln Sie Ihr Heimkino mit den hochwertigen Kinosofas von Sofanella - erstklassige Materialien und intelligente Funktionen für unvergessliche Filmerlebnisse.
>> Mehr erfahren>> Alle anzeigen
Mit der Crusader-Serie bringt InFocus drei smarte Lifestyle-Projektoren: Crusader Challenger, Master und Grandmaster. Wir testen die beiden größeren Modelle.
>> Mehr erfahren>> Alle anzeigenKategorie: D/A-Wandler
Ausstattungsliste: Alpha Design Labs ADL GT40
- GT40 has no setting for gain to match different impedance headphones. We recommend using 16 ohm to 300 ohm impedance headphones.
- IMPORTANT NOTE FOR RECORDING:
- The TENOR chip used in the GT40 has a bandwidth limitation of 12Mbps (USB 2.0 full speed operation), and due to this limitation only one I2S input or output can be set for 24bit/96KHz application at one time. Therefore, under this condition, for simultaneous multiple-channel applications other I2S interfaces must be configured at 16-bit/48KHz or 16-bit/96KHz. In other words, when recording it is necessary to set the audio Input on the computer to 24bit/96KHz (PC-Sound application; MAC-MIDI application), but do not set not the audio Output to 24bit/96KHz. The Output should be set to a lower 16bit resolution until recording is done. Then when you want to playback your 24bit/96KHz files through the GT40 you need to reset the output to 24bit/96KHz and reset the input to a 16bit resolution.
USB & Analog Playback and Record multimedia audio system | |
Connectivity | USB B Interface, Analog input/output RCA jack |
USB Playback Resolution | 24bit/96KHz |
USB Recording Resolution | 96kHz (Max) supports 32kHz/44.1kHz/48kHz |
Frequency response | 20Hz ~ 20kHz (40Hz: +0.5 dB, 15kHz:-0.5dB) |
SN ratio | -90dB (A-wtd) / Line Output |
Line Output Level | 1 Vrms |
Line Input Level | MC 0.4mV / MM 5mV / Line 1V |
Headphone Output Level | 80mW ( 32 ohm ) Max. |
Power Supply AC Adaptor Rating | AC 9V 0.5A |
Dimensions | 150 (W) x 111 (D) x 57 (H) mm |
Weight | 785g Approx. |
The load (Input impedance) for the ADL GT40 is as follows | |
Line 50K ohm Approx. | |
MM 46K ohm Approx. | |
MC 10K ohm Approx. | |
Maximum Input Level for MM | 5.0mVrms at 1K Hz |
Maximum Input Level for MC | 0.4mVrms at 1K Hz |
Maximum Input Level for LINE | 1Vrms at 1K Hz |
The Gain setting for the ADL GT40 is fixed at 62.5dB for MC and fixed at 48.5dB for MM. | |
(MC input to LINE output) => 62.5dB @ 1K Hz , +6dB(Line) | |
(MM input to LINE output) => 48.5dB @ 1K Hz , +6dB(Line) |