563_24276_2
Topthema: Soundbar · Canvas HiFi Canvas
Kann das was?
Bereits im Januar haben wir Ihnen die Canvas HiFi, die Mutter aller Soundbars vorgestellt. Nun hat der Hersteller an entscheidender Stelle nachgelegt – beim Klang.
>> Mehr erfahren>> Alle anzeigen
588_24248_2
Topthema: Audio System M-700.1MD, Audio System M-750.1MD 24V
Kleinstgeräte
Mit M-700.1MD und M-750.1MD 24V präsentiert Audio System Bassverstärker mit bisher nicht dagewesener Leistung auf kleinstem Raum.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Chario Academy Serendipity
Ausstattung & technische Daten
| Tecnical Details | |
| Low Frequency Load | NRS 2p sr Vented Isobaric Compound |
| Vent Geometry | Bidimensional Hyper-Exponential Hourglass Type |
| Configuration | 5-way Reversed Vertical Alignment Free-Standing |
| Drivers | 1 Tweeter 32 mm SILVERSOFT dome NeFeB motor 1 Midrange 130 mm ROHACELL® Poly-Ring NeFeB motor 1 Woofer 130 mm ROHACELL® Full-Apex™ Poly-Ring NeFeB motor |
| 1 Woofer 170 mm ROHACELL® Full-Apex™ Poly-Ring NeFeB motor 2 Sub 320 mm Natural Fibres - 2 Waves Surround HF motor | |
| Sensitivity | 93 dB SPL normalized to 1 m / 2.83 Vrms / decorrelated L/R pink noise in IEC 268-13 compliant listening room |
| Low Frequency Cut Off | 23 Hz @ -3dB referred to C4 WETS |
| Overlapping Points | 240/500/1250/1850 Hz |
| Rated Impedance | Modulus 4W (min 3.0) Argument ±36° |
| Size | 1610 x 400 x 580 mm (H x W x D) |
| Finish | Solid Walnut , Solid Cherry & HDF |
| Weight | 100 kg |
| Cabinet | Solid walnut or solid cherry and HDF. The structure comprises two cabinets: the lower contains two subwoofers; the upper contains two woofers, one midrange and one tweeter. |
| The two wood cases are separated by four cylindrical proprietary-engineered elastomeric puffers acting as vibration decouplers to dissipate mechanical energy by orthogonal elongation | |
| Speakers Orientation | Speakers should be tilted inward facing the listener |
| Listening Distance | Optimum speaker-listener distance > 3.5 m |
| Listening Layout | A carpeted floor in front of the speakers is recommended |
| Side And Back Walls | Should be at least 1m away from the speaker front baffle |
| Normal Amping 400 Watt / 4 Ohm Average Power Max | Run the cable from the power amplifier to the lower terminals of the subwoofer binding post, then connect upper terminals to the mid-high unit binding post by means of the short cable with banana plug provided with the speakers. |
| Bi-Amping 200 Watt / 4 Ohm Average Power Max | Run the cable from the power amplifier to the lower terminals of the subwoofer binding post leaving upper ones idle. Repeat to connect the power amplifier to the mid-high unit binding post (two terminals only) All quantities in SI Units |
| Notes | |
| Average Power computed as V2rms / R | |
| Overlapping Points is a proprietary implementation for unconventional X-over | |
| Speakers not shielded | |
| Specs subject to change without notice | |
