Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Gamut The MinenT M3
Specifications | |
Enclosure type | Impulse optimized Bass Reflex Enclosure build |
Enclosure build | Real wood veneered Laminated Curved MDF |
Enclosure construction | Internal Bracing and pressure control segments to optimize cabinet surfaces behaviour. |
Enclosure Acoustics internally | critically positioned & optimized acoustic elements. |
Port Opening | Flow optimized Aluminium terminated 3 mm thick high pressure polymer. |
Input terminals | GamuT Machined Gold plated Bronze and aluminium terminals. |
Connection options | Minimum loss bare wire connection, 8 mm Spades or 4 mm Banana. |
Separate connection for the tweeter and for the mid / woofer section | |
Internal wiring | GamuT " Worm Hole Signature" wires |
Woofer/mid | 7" sliced cone, dynamic optimized, GamuT Hand treated cone structure. |
Tweeter | impulse and resonance optimized Double ring radiator, with GamuT stainless steel wave guide |
Network | Impulse correct and resonance optimized NRLI. |
Network configuration | 2-way baffle-corrected for free in room placement |
Front cover | Flow optimized MDF frame covered by acoustically transparent fabric |
Impedance | 5 ohms nominal |
Minimum impedance | 4.0 ohms at 220 Hz |
Crossover point | 2250 Hz |
Sensitivity | 87.5dB/2.83V |
Frequency response | 38Hz - 50 kHz |
Dimensions | 400mm (H) 226mm (W) 456mm (D) |
Weight | 20 kg |
Recommended amplifier for maximum performance | minimum 100W into 4 ohms |
maximum 400W into 4 ohms | |
M3 Column | |
Construction | Painted MDF with cavity for mass adjustment. Bolt on system |
Floor coupling | Solid Anodized aluminium spike system, resonance controlled. |
Height | 615mm |
Weight | 10kg |
Dimensions | 659mm (H), 270mm (W), 463 (D) |