
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahrenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Funktion-One XO2
Specification | |
Type | Audio management system |
Inputs | 2 electronically balanced |
Impedance | > 10k ohms. |
CMRR | > 65dB 50Hz - 10kHz |
Outputs | 6 electronically balanced |
Source Imp | < 60ohms |
Min. Load | 600ohm |
Max. Level | +20dBm into 600 ohm |
Frequency Resp | ±1/2dB 20Hz-20kHz -3dB @ 32kHz |
Dyn. Range | > 116dB 20Hz-20k unwtd |
Distortion | %LT% 0.02%@1kHz +18dBm |
Maximum Delay | 650 mS |
Min Step Size | 0.3 µS |
Input Gain | +6dB to -40dB in 0.1dB steps |
Output Gain | +15dB to -40dB in 0.1dB steps and mute |
st Parametric Equalisation | 9 Sections per Output |
Filter Gain | +15dB to -30dB in 0.1dB steps |
Freq. Range | 19.7Hz - 32kHz, 1/36 octave steps |
Filter Q / BW | 0.4 to 128 / 2.5 to 0.008 (Sections switched to shelving response) |
Low frequency | 19.2Hz - 1kHz |
High frequency | 1kHz - 32kHz |
Shelf gains | ±15dB in 0.1dB steps |
High and Low Pass Crossover Filters Filters | 1 of each per output |
Freq. Range HPF | 10Hz - 16kHz, 1/36 octave steps |
Freq. Range LPF | 35Hz - 22kHz, 1/36 octave steps |
Responses | 1st Order 6dB/Oct. |
Bessel/Butterworth 18dB/Oct. | |
Bessel/Butt./Linkwitz-Riley 12/24/48dB/Oct. | |
Threshold | +22dBu to -10dBu |
Attack time | 0.3 to 90 milliseconds |
Release time | 2/4/8/16/32 x Attack time Automatic time constant facility also included |
Latency | 1.5mS (analogue in - analogue out @ 96kHz) |
Display | 2 x 24 Character LCD |
Input meter | 2 x 4 point - 24dB to digital clip |
Output meter | 6 x 4 point - 24dB to +4dB into limit. |
Connectors | Inputs: 3 pin female XLR |
Outputs: 3 pin male XLR | |
External: 9 pin DEE connector (RS232) | |
Power: 3 pin IEC | |
Power | 60 to 250V ±15% @ 50/60Hz |
Consumption | < 30 watts |
Weight | 3.3kg. Net |
Size | 1.75'(1U) x 19' x 11.8' (44 x 482 x 300mm) excluding connectors |