Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigenFür einen eleganten, überraschenden und sehr klangvollen Musikgenuss - draußen und drinnen.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: JBL AM7200/64
Specification | |
Type | High Power Mid-High Frequency |
Frequency Range ( –10 dB) | 260 Hz – 20 kHz |
Frequency Response ( ± 3 dB) | 330 Hz – 18 kHz |
Coverage Pattern | /64: 60° x 40°, rotatable waveguide |
/95: 90° x 50°, rotatable waveguide | |
Crossover Modes | Bi-amp/Passive switchable |
Crossover Frequencies | 2.3 kHz |
Transducer Power Rating (AES) | MF: 350 W (1400 W peak), 2 hrs |
HF: 100 W (400 W peak), 2 hrs | |
Long-Term System Power Rating (IEC) | MF/HF: 200 W (800 W peak), 100 hrs |
Maximum SPL | Bi-amp mode: |
MF: 133 dB-SPL cont avg (139 dB peak) | |
HF: 135 dB-SPL cont avg (141 dB peak) | |
Passive mode: | |
MF/HF: 133 dB-SPL cont avg (139 dB peak) | |
System Sensitivity of Passive Sections (1W @ 1m) | Passive mode: 108 dB SPL |
Nominal Impedance System Sensitivity | 8 ohms |
Midrange Driver | JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver |
Sensitivity (1W @ 1m) (Midrange) | 108 dB SPL |
High Frequency Driver | JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil |
Sensitivity (1W @ 1m) (High Frequency) | 115 dB SPL |
Enclosure | Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood |
Suspension Attachment | 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware |
Finish | Black DuraFlex™ finish. White available upon request. |
Grille | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
Input Connector | NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
Environmental Specifications | Mil-Std 810; IP-x3 per IEC529. |
Dimensions (H x W x D in vertical cabinet orientation) | 548 x 561 x 657 mm (21.6 x 22.1 x 25.9 in) |
Net Weight | 27.2 kg (60 lb) |
45-2149
Zur 3. Dimension |