462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: LEA CONNECT 1504D
Ausstattung & technische Daten
| Specification | |
| Type | Professional Amplifier |
| 2Ω | 1500W |
| 2.7Ω | 1500W |
| 4Ω | 1500W |
| 8Ω | 1500W |
| 70V / 100V | 1500W |
| Audio Spec | |
| Inputs | Analog: Balanced analog Inputs with user selectable 26 dB and 34 dB input sensitivity |
| Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast | |
| AES 67: Configurable via the Dante Controller Software | |
| THD+N | 0.1% (20Hz to 20kHz) |
| Frequency Response | 20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω |
| Signal to Noise Level | 105dB (20Hz to 20kHz referenced to 8Ω) |
| Crosstalk | 70dB (20Hz to 20kHz) |
| Amplifier Output Classification | Class D with Proprietary Smart Power Bridge Technology allowing for bridged output functionality without sacrificing an amplifier channel. This model has two Smart Power Bridge channels. |
| DSP | |
| DSP Architecture | Analog Devices Sharc 96kHz DSP Processor with 32-bit floating point support and built in sample rate converters |
| Input Matrix | Routable matrix; any input to any output with primary and secondary input priority |
| Crossovers | Advanced DSP with Linear Phase FIR Crossovers and up to 48dB/Octave IIR Filters (Linkwitz Riley and Butterworth) |
| Parametric EQ | 16 Band Parametric EQ per channel |
| Output Delay | 4 seconds per channel |
| Output Protection | DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection |
| User Adjustable Limiting | Peak Voltage and RMS Voltage |
| Load Monitoring | Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources |
| Control, Monitoring, Network | |
| User Interface | Web Browser User Interface, 3rd Party API control, or CLOUD control |
| External I/O | External I/O In: Toggles Remote On/Off |
| External I/O Out: Indicates Amplifier Health | |
| Operation | |
| AC Mains | 100VAC - 240VAC +/- 15% 50Hz or 60Hz |
| Power Supply | Universal Switch Mode Power Supply with Power Factor Correction (No PFC in 84D, 164D, 88D, & 168D) |
| Physical Spec | |
| Dimensions (L x W x H) | Product: 17.88” x 19” x 2U (454mm x 482mm x 2U) |
| Weight | Product 26 lbs / 11.8kg |
| Cooling | Front to Rear Variable Fan Speed Cooling |
| Fan Noise at idle is 50dB @ 1m | |
| Fan Noise at 50% is 57dB @1m | |
| Fan Noise at full speed is 63dB @ 1m | |
