390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
478_17092_1
Anzeige
Topthema: Ein klingender Pflanzentopf
Revox Botanic
Für einen eleganten, überraschenden und sehr klangvollen Musikgenuss - draußen und drinnen.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Manley NEO-CLASSIC 300B RC
Ausstattung & technische Daten
| Specification | |
| Type | PREAMPLIFIER WITH REMOTE CONTROL |
| Inputs | 5 stereo pair unbalanced RCA jacks |
| Outputs | 2 stereo pairs MAIN out same as SUB out unbalanced RCA jacks |
| RECORD output | 1 stereo pair pre-volume control unbalanced RCA jacks |
| HEADPHONE Outs | 2 front panel 1/4" headphone jacks |
| Optimized headphone impedance switching | 30-400 Ohms to 300-4000 Ohms |
| MUTE | Selecting HEADPHONE operation mutes LlNE outputs |
| Output Vacuum Tubes | 2 x 300B Electro-Harmonix |
| Input Tubes | 2 x 6SL7 Sovtek |
| Rectifier Tubes | 2 x 5AR4 Ruby |
| Regulator Tubes | 2 x OD3 |
| Gain | factory set at 12 dB at max Volume |
| Internal Variable Feedback | 8.5 dB of global NFB is used @ 12 dB of gain, adjustable trim -1.7dB to +1dB |
| Noise Floor | typically -70 dB (1 Hz - 100 KHz) |
| S/N Ratio | typically 105 dB (A WGT, 20 Hz - 20 KHz) |
| Frequency Response | 5 Hz to 50 KHz 1dB |
| Channel-to-Channel Separation (L to R) | @1KHz 48 dB; @10KHz 35 dB; @20KHz 34 dB |
| Channel-to-Channel Separation (R to L) | @1KHz 50 dB; @10KHz 40 dB; @20KHz 37 dB |
| THD | 0.08 % @ 1KHz at 1V rms out |
| Distortion THD+N | -80 dB (.01 %) zero "crossover" distortion, mostly 2nd harmonic |
| Input Sensitivity | 250mV (-9.8dBu) yields 1V out |
| Input Impedance | 100 kOhm Noble volume control |
| Maximum Input Level | 5.5dBu or 1.459 Vrms @ 1KHz, volume control at maximum |
| Output Impedance (LINE STAGE) | 100 Ohms |
| Maximum Output Level | 17.2dBu or 5.636 Vrms @ 1KHz, volume control at maximum |
| Output Power (100 Ohm Headphones) | 1W (10 V RMS) (28 V P-P) |
| Output Power (600 Ohm Headphones) | 1W( 25 V RMS) (70 V P-P) |
| Power Consumption | 170 Watts (1.4 A @ 120VAC) |
| Operating Mains Voltage | Factory set for 100V, 120V or 220-240VAC operation for original destination countrys mains voltage. |
| Operating Mains Voltage | changeable with power transformer re-wiring and fuse value change. |
| Mains Voltage Frequency | 50~ 60Hz |
| Mains Fuse Value | 3A SLO-BLO (100, 120VAC operation), 1.5A SLO-BLO (220-240VAC operation) |
| Dimensions | W=19" x L=13" |
| Top Deck Height | 4" |
| Transformer Height | 3 1/2" |
| Suggested shelf height minimum | 10" (depending on height of 300B tube) |
