Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Kind K4HZ
General | |
Number of amplifier channels | 4 |
Total burst power all channels | 2800 W |
Max output power single channel EIAJ test standard, 1 kHz, 1% THD | |
2 ohms | 700 W |
4 ohms | 500 W |
8 ohms | 500 W |
Hi-Z 70 V (note 1) | 500 W |
Hi-Z 100 V (note 1) | 500 W |
Max output power bridged EIAJ test standard, 1 kHz, 1% THD | |
4 ohms | 1400 W |
8 ohms | 1000 W |
Max output votage / current | NA |
Protection features | Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection |
Amplifier audio performance | |
Gain, selectable | 26 dB, 32 dB (factory set) |
Input sensitivity @ 4 ohms | 1.13 V |
Max input level | 15dBu |
Frequency response | 20 Hz - 20 kHz (1 W @ 8 Ohm - +/- 0.5dB |
S/N ratio (20 Hz - 20 kHz) | >104 dBA |
Output circuitry | Class D |
Input impedance | 10k balanced |
THD+N | <0.3% from 1W to 0.5dB below clip (typically <0.1%) |
Front panel | |
Indicators | (LED) Active, Protect, Hi temp, DSP option, signal out -35 dB, -20 dB, -10 dB, Limiter |
Controls | Mains switch, Gain control (per channel) |
Maintenance | Removable dust filter holder |
Rear panel | |
Audio signal input connectors (per channel) | XLR female combo 1/4 phone jack TRS, 3-pin terminal block (balanced) |
Loudspeakers output connectors | Neutrik Speakon NL4MD (per channel) |
Networking | Data port hole for DSP option |
AC mains cordset / chassis connector | Schuko CEE 7/7 16 A / IEC20A |
Controls | (switch) HPF 35 Hz or 70 Hz, Link/Bridge, Analog or AES3 |
AC mains power | |
Power supply | Switch mode power supply, internally switchable 230 / 115 V nominal |
Operating voltage | 100-240 V +/-10%, 50-60 Hz |
Current draw | @ 230 V / @ 115 V |
Idle | 0.6 A / 0.7 A |
1/8 of max output power@ 4 ohms | 2.0 A / 3.4 A |
1/4 of max output power@ 4 ohms | 3.3 A / 6.1 A |
Thermal | Operating temperature 0° - 40° C / 32° - 104° F |
Dissipation and cooling | Fan, continuosly variable speed, temperature and load current controlled, front to rear airflow |
Idle | 220 BTU/h | 55 kcal/h |
1/8 of max output power@ 4 ohms | 433 BTU/h | 109 kcal/h |
1/4 of max output power@ 4 ohms | 646 BTU/h | 163 kcal/h |
Chassis construction | 1.0 mm / 0.04" zinc steel chassis with removable dust filter holder; 3mm / 0.12" front panel ears and side reinforcement with rear support |
Dimensions | W 483 mm / 19", H 89 mm / 2 RU, D 390 mm / 15.4" from front mounting rails |
Weight | 10.5 kg / 22.1lb |