Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VSXNET 12.2BP
Performance | |
System Type | Subwoofer - Band pass |
Frequency Response (-3 dB) (1) | 40 Hz - 160 Hz |
Frequency Response (-10 dB) (1) | 35 Hz - 200 Hz |
Rated Maximum SPL (2) | Textured black or white paint (custom colours on request) Powder coated perforated steel grille |
Driver Complement | 2 x 300 mm (12") Bass drivers |
Crossover (DSP Generated) | Fixed, Internal High-pass filter - 38 Hz, 24 dB / octave, Variable low pass filter |
Distortion | |
10% Full Power (28.3 V) | 2nd Harmonic 50 Hz: 1.38%, 100 Hz: 1.29% |
3rd Harmonic 50 Hz: 0.62%, 100 Hz: 0.14% | |
1% Full Power (8.9 V) | 2nd Harmonic 50 Hz: 0.32%, 100 Hz: 0.29% |
3rd Harmonic 50 Hz: 0.18%, 100 Hz: 0.16% | |
Electronics | |
Efficiency | >85% typically |
Damping Factor | 120 ref 8 Ohms |
Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
Input Impedance | 5.6 kOhms (unbalanced)11.2 kOhms (balanced) |
Output Power (Programme) | 1200 W |
Input Sensitivity | 1.4 V (+5.5 dBu) |
System Type | Dual channel Class D (Bridged) |
PSU Specifications | |
Input Connector | Locking Neutrik Powercon |
Voltage Selection | Automatic (115 / 230 V, 45 - 65 Hz) |
System Type | High current, high frequency switch mode |
Efficiency | >90% typical |
Input voltage | 100 V / 115 V / 230 V nominal +/-10% |
Mains fuse | External |
Fuse type | T10AT |
Other features | Automatic soft start |
DSP SYSTEM | |
Comms Facilities | Firmware updatable and selected parameters editable |
Communications | Serial - RS485 Proprietary message format |
Dynamic Range | 112 dB (A) typical |
DSP | 3rd generation SHARC |
Sampling Frequency | 96 kHz 24 bit A/S-D/A word length |
Format | 1 IN - 1 OUT |
Construction | |
Enclosure | 188 litres, 18 mm (5/8") birch plywood, internally braced |
Finish | Textured black or white paint (custom colours on request) Powder coated perforated steel grille |
Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x RJ45 (network in) 1 x RJ45 (network link) 1 x Neutrik Powercon |
Controls & Indicators | LED on front of cabinet behind grille (wink indicator for locating & assigning) Power LED (blue) Signal LED (green) Limit LED (red) User DSP - defeat switch Power switch |
Dimensions (H x W x D) | 400 x 830 x 720 mm |
Net Weight (ea) | 45 kg |
305-2128
MD Sound GmbH & Co. KG |