Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein
71_16205_2
Topthema: Raumakustik verbessern - Schallabsorber einsetzen

Kategorie: Profi- / Musiker-Equipment


Ausstattungsliste: Tannoy VXP 15Q


Ausstattung & technische Daten
Performance
Frequency Response (-3 dB) (1) Full Range Mode 60 Hz - 25 kHz
Frequency Range (-10 dB) (1) Full Range Mode 47 Hz - 30 kHz
Frequency response (Hi-pass mode) 100 Hz - 25 kHz ±3 dB
Frequency Response (-3 dB) (1) High Pass Mode 100 Hz - 25 kHz
Frequency Range (-10 dB) (1) High Pass Mode 80 Hz - 30 kHz
Dispersion (-6 dB) 75 degrees (Horizontal) x 40 degrees (Vertical)
Driver Complement 1 x 380 mm (15.00") PowerDual
Crossover Passive 1.3 kHz
Directivity factor (Q) 12 averaged 1 kHz to 8 kHz
Directivity index (DI) 10.8 averaged 1 kHz to 8 kHz
Rated Maximum SPL (2) Average: 125 dB
Peak: 131 dB
Distortion
10% Full Power (17.9 V) 2nd Harmonic 250 Hz: 1%, 1 kHz: 1.61%, 10 kHz: 7.79%
3rd Harmonic 250 Hz: 0.10%, 1 kHz: 1.02%, 10 kHz: 1.15%
1% Full Power (5.6 V) 2nd Harmonic 250 Hz: 0.30%, 1 kHz: 0.58%, 10 kHz: 2.32%
3rd Harmonic 250 Hz: 0.06%, 1 kHz: 0.52%, 10 kHz: 0.13%
Amplifier
Maximum signal input for clip Input attenuator at Maximum: +4.5 dBu (Hard clip will occur at 14.5 dBu input signal)
Dynamic Range 106 dB
Efficiency >90%
Damping Factor >400 ref 8 ohm at 1 kHz
Distortion <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth)
Input Impedance 10 kOhms (unbalanced)
20 kOhms (balanced)
PSU Specifications
Input Connector Locking Neutrik Powercon
Voltage Selection Universal mains input
System Type High efficiency, regulated switch mode power supply
Efficiency >85% typical
Input voltage 100 Vac - 240 Vac +/- 10%, 50 - 60 Hz +/-10%
Mains fuse Internal
Fuse type 3.15AT
Other features Inrush current limiter
Standby power consumption < 1 W
Idle power consumption < 15 W
Maximum power consumption 300 W
Protection Systems
Over Current Output current limiter, always active
Clip limiter Output voltage clip limiter, always active
Temperature Over temperature causes protective mute
Brownout Automatic protection & recovery
Mains Inrush current limiter
Indicators 1 x Power LED 1 x Signal LED 1 x Limit LED (Power LED: Red = Standby, Green = On, Yellow = Temperature protection active)
Amplifier Type Inherently bridged, globally modulated, high Performance single channel class D
Construction
Enclosure 54.9 litres, 18 mm birch plywood, vented and internally braced
Finish Textured black or white paint (custom colours on request) Powder coated perforated steel grille Airnet cloth behind
Connectors 1 x female XLR (input) 1 x male XLR (link) 1 x Neutrik Powercon
Controls & Indicators Level Control Power LED (Blue) Signal LED (Green) Limit/Protect LED (Red) Full Range / HighPass Switch (110 Hz) Power Mode Switch Power Switch
Dimensions (H x W x D) 590 x 450 x 420 mm
Net Weight (ea) 29 kg