Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Raumprozessoren
Ausstattungsliste: Mini-DSP miniDSP 2x4 kit
Specification | |
Type | Audio Processing Board |
Digital Signal Processor Engine | Analog Devices Fixed point DSP |
Internal Processing resolution & Sample rate | 28-56 bit / 48 kHz |
Input/Ouput Configuration | 2 in / 4 out |
Audio Input Connectivity | Unbalanced input, RCA terminated |
Audio Output Connectivity | Unbalanced output, RCA terminated |
Input / Output Max Levels | IN: 0.9Vrms / 2Vrms (jumper–selectable) |
OUT: 0.9Vrms | |
Input Impendance | 0.9Vrms position = 9 kΩ |
2Vrms position = 20 kΩ | |
Output Impedance | 560 Ω |
Calibration Software | miniDSP 2x4 plug-ins |
Filtering Technology | IIR |
DSP Presets | - |
Dimensions | 75mm x 75mm |
Power | USB powered and/or 4.5~24Vdc input via header (150mA @ 5V) 2.1mm round DC plug |
Compatible Boards | miniDIGI |
Impulse Response Correction | No |
Infrared Remote Learning | No |
Win/Mac Compatible | Yes |
UMIK-1 Included | No |
Bass Management | Yes |
Room EQ Wizard Support | Yes |