Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein
71_16205_2
Topthema: Raumakustik verbessern

Kategorie: Subwoofer (Home)


Ausstattungsliste: Monitor Audio Platinum PLW215 II


Ausstattung & technische Daten
Technische Daten
System Format Sealed Cabinet with vibration cancelling driver configuration, 25 mm M.D.F. construction with internal bracing and sealed amplifier compartment
Lower Frequency Limit -3dB @ 23Hz / -10dB @ 18Hz (Freistehend) Standardeinstellung: Music,
-3dB @ 19Hz / -10dB @ 16Hz (im Raum) Standardeinstellung: Music
Limited by low frequency protection filter (-3 dB @ 12 Hz)
Upper Frequency Limit -3 dB @ 150 Hz
Drive Unit Complement 2 x 15" C-CAM sub-woofer drivers featuring inverted surround and triple suspension for increase support at high excursions.
Black single layer edge wound 3" voice coil with vented pole, vented coil and black CED coated motor unit to reduce power compression and increase thermal dissipation.
FEA optimised cone, magnetics and suspensions for optimal performance and increased linearity
Linear Driver Excursion 42 mm Peak to Peak, Total displacement 6.4 Litres
Amplifier Output Dual Amplifier design with a single amplifier powering each driver, Combined 1400 W RMS, 2000 W Peak (Burst Ratio 1:4 Continuous, Measured into two non-reactive 4 Ohm Loads)
Amplifier Classification 2x Class-D amplifiers, Balanced Differential Input, Differentially loaded Power Supply, DSP controlled. High current Switch mode power supply (SMPSU)
DSP 172 MHz DSP Core with 3500 instructions per sample, 139 dB of dynamic range and 56-bit double precision processing, dynamically updated by an 80 MHz MCU
Digital Conversion Wolfson Microelectronics (Cirrus Logic) ADC & DAC @ 24bit/48KHz. (WM8786 ADC & WM8740 DAC)
LED UI Control Panel LED UI Control Panel Adjustable brightness 0% - 100%, configurable auto off feature. Quick access to menu items: Trim, LPF, Phase, Preset Select
Global Settings (via SubConnect) Display Brightness (0-100%), Dim (to 50% or to Off), Default Preset, Mute Link Outputs, 12V Trigger Assignment (Power on/off or Preset select),
Input gain (Master -80 to +20dB, Trim -6 to +6dB, Mute), Phase (0-360 in 15 degree steps), Night Mode Threshold (-2dB to -20dB), Auto On / OFF (Enable Signal Sense, Always On, Time to off 5-240mins)
User Presets (via SubConnect) 4 fully configurable user Presets including, Preset Name, LPF Frequency (5Hz Steps from 20-135Hz), LPF Slope Order (-12 or -24dB/Oct), Input (Stereo, LFE or Both),
Trim Offset (-6 to +6dB), EQ mode (Impact, Music, Movie or Default), User EQ (6 adjustable filters applied on top of EQ mode), Room EQ (On/OFF), Night Mode (On/OFF)
User Equalisation (via SubConnect) 6 fully controllable EQ filters and 6 default filters with gain offset per preset, Default settings: Flat / Music / Movie / Impact
Room Correction EQ 6 System controlled parametric EQ filters set using advanced detection algorithm. Measurement can be initiated from the control panel or the SubConnect with up to microphone 6 positions (default 2)
Night Mode Night mode, assignable (on or off) per Preset with global threshold (-2 dB to -20 dB). Introduces dynamic range reduction lowering the level of loud sections
Phase Control 0-360 degrees, Increments of 15 degrees with a pure invert at 180 degrees
Low Pass Filter Alignment 2nd or 4th order (12 or 24 dB/Octave), Increments of 5 Hz from 35 Hz to 135 Hz
Auto Sensing Input Requirements Line Level >1mV on unbalanced and balanced inputs. Auto Standby feature, adjustable between 5-240 minutes in increments of 5mins
Digital Volume Level -11 to +11dB in 1dB increments, Via the control panel. -80 to +20 in 1dB increments, via SubConnect application
IR Remote Control Code Supplied IR remote. Front facing IR receiver with red LED response. Additional discrete IR codes for automation available in the manual
SubConnect (PC Application) Windows (7 onwards) (32/64bit) compatible setup application available from the Monitor Audio website and on the supplied USB stick in the Platinum II Tool Kit.
Allows the user to control advanced subwoofer setup features. Settings can be saved while not connected to the subwoofer for off sight setup.
Audio Input Connection eset LFE Input with Balanced (XLR) and Unbalanced (RCA) inputs, Stereo Input with unbalanced (RCA) inputs. Inputs individually assignable to any Preset
Connection 12v Trigger in (3.5mm mono mini-jack, 6v threshold), assignable to On/Off or Preset change, 3.5mm Microphone input jack (mic supplied),
RJ45 connector supporting RS232 (EIA/TIA - 561, Tx Pin 6, Rx Pin 5, Gnd Pin 4), IR repeater – Output (3.5mm mono mini-jack), USB – Type B, for connecting to SubConnect PC application and Firmware update
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Manually selected)
Power Consumption Maximum 1200 W, Standby <0.5 W (ErP compliance)
Fuse Type 20 mm T12.5AL 250VAC
Weight (unpacked) 57.54 kg
External Dimensions (Including Amp, Drivers & Terminals (H x W x D)) 500 x 504 x 512.5 mm
External Dimensions (Including Amp, Drivers, Terminals & Feet (H x W x D)) 545.8 x 504 x 512.5 mm
Neu im Shop:

Neue Hifi Tassen: Vintage Hifi, High End Hifi, Analogue Hifi, Hifi Stereo

>> Mehr erfahren
93_0_3
Topthema: Black Deals bei Lautsprecher Teufel
Black_Deals_bei_Lautsprecher_Teufel_1542191852.jpg
Anzeige
Jetzt bis zu 40% sparen!

Der lauteste Sale des Jahres beginnt! Sichere dir XXL Rabatte auf Audio Highlights bei Lautsprecher Teufel. Zum Beispiel die Ultima 40 Mk2 (2017). Die Stereo-HiFi-Lautsprecher eignen sich ideal für jede Party, oder für den entspannten Musikgenuss.

>> Mehr erfahren
Interessante Testportale:
  • www.smarthometest.info
  • www.heimwerker-test.de
  • www.hausgeraete-test.de
Folgen Sie uns:
  • facebook - follow us
  • twitter - follow us
  • google - follow us
Allgemeine Händlersuche
Landkarte PLZ0 PLZ1 PLZ2 PLZ3 PLZ4 PLZ5 PLZ6 PLZ7 PLZ8 PLZ9

Klicken Sie auf Ihre PLZ oder wählen Sie ein Land

Händler des Tages

hidden audio e.K.