Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigenMit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Tuner
Ausstattungsliste: Crestron C2N-TXM
Audio (analog) | |
THD+N | <0.01% @1kHz |
S/N Ratio | >97 dB balanced, >95 dB unbalanced, 20Hz-22kHz A-weighted |
Crosstalk | > -90 dB 20Hz-22kHz |
Connectors | |
NET | (1) 4-pin 3.5mm detachable terminal block; Cresnet® slave port, connects to Cresnet control network |
AUDIO OUT (CAT5) | (1) 8-pin RJ45 female, shielded, CAT5 balanced stereo audio output port; Maximum Output Level: 4 Vrms; |
Connects to any “CH” CAT5 audio input port or bidirectional audio port; Maximum Cable Length: 500 ft | |
SIG | (1) 2-pin 3.5mm detachable terminal block; Connects to remote sensitivity indicator (included); Used during setup to optimize antenna position |
SPDIF | (1) RCA female, S/PDIF coaxial digital audio output |
AUDIO OUT L/R | (2) RCA female, unbalanced stereo line-level audio output; Maximum Output Level: 2 Vrms; Output Impedance: 100 Ohms; Minimum Load: 1k Ohms |
XM ANT | (1) F-type coaxial (F-to-SMB adapter included); Indoor/outdoor high-gain antenna w/20 ft cable included; Available Power: 200 mA @ 5 Volts DC |
G | (1) 6-32 screw, chassis ground lug |
Headphone (front) | (1) 3.5mm mini TRS phone jack |
Display | |
Display | (3) Green LED 7-segment digits; Displays signal source, signal strength, headphone volume level, and channel |
Power Requirements | |
Cresnet Power Usage | 8 Watts (0.34 Amps @ 24 Volts DC) |
XM Antenna Power | 200 mA @ 5 Volts DC |
Environmental | |
Temperature | 32° to 122°F (0° to 50°C) |
Humidity | 10% to 90% RH (non-condensing) |
Enclosure | |
Chassis | Metal, black finish |
Faceplate | Extruded aluminum, black finish with polycarbonate label overlay |
Mounting | Freestanding or 1U, 1/2 width 19-inch rack-mountable (adhesive feet included, ST-RMK rack kit sold separately) |
Dimensions | |
Height | 1.80 in (46 mm); 1.70 in (44 mm) without feet |
Width | 7.07 in (180 mm) |
Depth | 6.55 in (167 mm) |
Weight | 1.86 lb (844 g) |