
Kenwoods brandneue Multimedia-Headunit bringt nicht nur einen riesigen 10,1-Zoll-Bildschirm mit, sondern auch eine speziell auf Wohnmobile zugeschnittene Navigation.
>> Mehr erfahren>> Alle anzeigen
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Röhrenverstärker
Ausstattungsliste: Jolida JD 1000 BRC
Specification | |
Rated Output Power | 100 W per channel at 8 ohms, 25Hz to 70KHz |
Maximum Power Output | 150 W per channel at 8 ohms, 1KHz |
Frequency Response | (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB |
Bandwidth | 13Hz to 80kHz + 3dB; 0dB 100 W 1KHz |
Distortion THD | Less than 1% at 100 W output, 28Hz to 15KHz |
Circuit Type | Ultra Linear, Class AB1 |
Input Impedance | 100Kohms |
Input Sensitivity | 500mV at 1KHz and 8 ohms for 100-watt output |
Output Impedance | 4 ohms and 8 ohms |
Negative Feedback | Less than 5 dB |
Noise and Hum | 85dB below rated output |
Tube Complement | 4 matched pairs (8) of 6CA7/EL34 power output; 2 pcs. 12AX7 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers. |
Power Requirements | 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option) |
Dimensions | 17 1/8 inches wide by 16 inches deep by 9 7/16 inches high |
Weight | 62 pounds net, approximately 74 pounds packaged |
Bias Settings | 400 millivolts + 40 mV |
Fuse | 110 - 120 VAC, 6.3 Amp Slo Blo ; 200 - 240 VAC, 3 Amp Slo Blo |