700_24860_2
Topthema: Zubehör-Kabel · Symphonic Line Harmonie + Harmonie HD + Das Schnelle
Schnelligkeit und Harmonie
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: Anthem STR Preamplifier
Ausstattung & technische Daten
| PHONO PREAMPLIFIER | |
| Input Impedance | 100 Ω (MC), 47 kΩ || 270 pF (MM) |
| RIAA Response (20 Hz to 20 kHz) | ± 0.1 dB |
| Gain (1 kHz, volume set to 0 dB) | 61 dB (MC), 41 dB (MM) |
| DSP Mode | Maximum Input (at 1 kHz for < 0,01% THD 20 Hz - 20 kHz) 3.6 mV (MC), 38 mV (MM) |
| THD+N (at 1 kHz 20 Hz - 20 kHz BW, 2 Vrms output) < 0.02% (MC), < 0.003% (MM) | |
| THD (at 1 kHz 20 Hz - 20 kHz BW, 2 Vrms output) 0.002% (MC), < 0.0015% (MM) | |
| SNR (IEC-A, 2 Vrms output) 84 dB (MC), 102 dB (MM) | |
| Direct Mode | Maximum Input Direct Mode (at 1 kHz for < 0,01% THD 20 Hz - 20 kHz) 11.8 mV (MC), 129 mV (MM) |
| THD+N (at 1 kHz 20 Hz - 20 kHz BW, 2 Vrms output) < 0.008% (MC), < 0.003% (MM) | |
| THD (at 1 kHz 20 Hz - 20 kHz BW, 2 Vrms output) 0.002% (MC), < 0.0015% (MM) | |
| SNR (IEC-A, 2 Vrms output) 92 dB (MC), 110 dB (MM) | |
| PREAMPLIFIER | |
| Frequency Response | digital-in, 192 kHz 10 Hz - 50 kHz (+0.00, -0.50 dB) |
| digital-in, 96 kHz 10 Hz - 45 kHz (+0.00, -0.50 dB) | |
| digital-in, 44.1 kHz 10 Hz - 20 kHz (+0.00) | |
| analog-in, DSP mode 10 Hz - 40 kHz (+0.02, -0.20 dB) | |
| analog-in, direct mode 10 Hz - 80 kHz (+0.00, -0.10 dB) | |
| THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output) | DSP Mode 0.001% Digital in, 0.0016% Analog in |
| Analog Direct Mode 0.0016% | |
| SNR (at 1 kHz, IEC-A, 2 Vrms output) | DSP Mode 113 dB (digital-in), 108 dB (analog-in) |
| Analog Direct Mode 120 dB | |
| Maximum Output ( <0.1% THD ) | RCA connectors (direct and DSP modes) 3.3 Vrms |
| XLR connectors (direct and DSP modes) 6.6 Vrms | |
| XLR Configuration | Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted |
| POWER REQUIREMENT | |
| Power Requirement | This product operates from a single phase AC power source that supplies between 90V and 264V at a frequency of 50 or 60 Hz. |
| POWER CONSUMPTION | |
| Standby | 0.38 W (120V), 0.45 W (240V) |
| Standby + Network | 1.1 W (120V), 1.2 W (240V) |
| Typical Use | 10 W |
| DIMENSIONS | |
| Height | 3-8/9” (9.93 cm) |
| Width | 17” (43.2 cm) |
| Depth (not including power cord) | 14-5/6” (37.69 cm) |
| Weight (unpacked) | 16.8 lb (7.6 kg) |
