Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Audio Solutions Rhapsody 200
Description | |
Three way, bass reflex cabinet. | |
Impedance-linear crossover with pin-to-pin construction. | |
Crossover submerged in compound-quartz sand mix to minimize interaction between crossover and internal acoustical waves or mechanical vibrations. | |
All cabinet walls are made of two layer MDF and two layers plywood. | |
Rear, top and bottom walls are 60mm thick, side walls - 32mm. | |
Cabinet have 5 degree angle to focus mid and high band in one point to improve sound imaging. | |
The ideal listening point is 226cm from each speaker. | |
This is the point where mid and high frequency driver axis crosses over. | |
The high frequency driver is in 109cm height. | |
This is average ear height when sitting on standard couch or chair. | |
Specification | |
Dimensions (HxWxD) | 1360mm x 348mm x 619mm |
Dimensions with stand (HxWxD) | 1447mm x 555mm x 766mm |
Weight | 65 kg each |
Sensitivity | 90.5 dB |
Power handling | 200 W rms |
Impedance | DC 3.45om; minimal 2.8om @ 9000Hz; maximal 20om @ 17Hz; |
Crossover frequency | 500/6500 Hz |
Frequency response (in-room environment) | 27-25000 Hz |
Drivers | 2,5cm silk dome tweeter, 15cm paper cone mids, 23cm paper cone bass drivers. |