Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenFür einen eleganten, überraschenden und sehr klangvollen Musikgenuss - draußen und drinnen.
>> Mehr erfahren>> Alle anzeigenKategorie: AV-Sonstiges
Ausstattungsliste: Crestron MP-AMP30
Typ | Media Presentation Audio Amplifier |
Audio | |
Input Volume Range | -55dB to +20dB |
Loudness | Active at volume settings below center detent |
Bass Gain Range | ±15dB @ 100Hz |
Treble Gain Range | ±15dB @ 10kHz |
Frequency Response | 20Hz to 20kHz ±0.5dB |
S/N Ratio | 75dB 20Hz to 20kHz A-weighted |
THD+N | 0.7% 20Hz to 20kHz |
Output Power | 15 Watts per channel at 8 or 4 Ohms |
Amplifier Protection | Electronic short-circuit and overload protection |
Connectors – Top Panel | |
AUDIO OUT 8Ω | (2) 2-pin 3.5mm detachable terminal blocks; Left & right channel speaker-level audio outputs; Wire Size: Connector accepts 16 AWG maximum; Output Power: 15 Watts per channel at 8 or 4 Ohms |
Connectors – Bottom Panel | |
AUDIO IN | (2) RCA female, unbalanced stereo line-level audio input; Maximum Input Level: 2 Vrms; Input Impedance: 18k Ohms; 3 ft (0.9 m) stereo RCA-RCA cable included |
PWR 24VDC 2.0A | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; (power pack included) |
Power Requirements | |
Power Pack | 2.0 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack included |
Environmental | |
Temperature | 41° to 104°F (5° to 40°C) |
Humidity | 10% to 90% RH (non-condensing) |
Heat Dissipation | 21 BTU/Hr |
Construction | |
Chassis | Aluminum w/polycarbonate label overlay and (4) integral mounting flanges, meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space |
Mounting | Freestanding or surface mount |
Dimensions | |
Height | 5.85 in (149 mm) |
Width | 3.91 in (100 mm) |
Depth | 1.43 in (37 mm) |
Weight | 11.8 oz (335 g) |