
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenKategorie: Car Hifi Endstufe Mono
Ausstattungsliste: Lightning Audio L-11000D
Specifications | |
Number of Channels | 1 |
Rated Power | 250 Watts RMS x 1 @ 4-Ohms |
500 Watts RMS x 1 @ 2-Ohms | |
1000 Watts RMS x 1 @ 1-Ohm | |
Max Power | 500 Watts RMS x 1 @ 4-Ohms |
1000 Watts RMS x 1 @ 2-Ohms | |
2000 Watts RMS x 1 @ 1-Ohm | |
Efficiency (average) | >80 |
Bridgeable | No |
Crossover Controls | Low-Pass: Variable from 50Hz - 250Hz @ 12dB/Octave Butterworth |
Infrasonic: 25Hz @ 24dB/Octave Butterworth | |
Tone Controls | Variable on-board bass boost 0dB - 12dB @ 45Hz |
Signal Input | Low-Level: 2 RCA (150mV to 4V) High-Level: 4-pin connector (300mV to 8V) |
Signal Output | Low-Level: 2 RCA |
Power Input Connector | Screw terminal |
Power Wire Gauge | 4 AWG |
Speaker Output Connector | Screw terminal |
Speaker Wire Gauge | Up to 10 AWG |
Heat Sink Type | Extruded aluminum |
Cooling | Convection |
Remote Control | Remote Level Control (included) |
Visual Indicators | Power: Green |
Thermal: Red | |
Protect: Red | |
Circuit Topology Class | CLASS-D |
THD at Rated Power 4-Ohm: <1.0% 2-Ohm: <1.0% | 4-Ohm: <1.0% |
2-Ohm: <1.0% | |
1-Ohm: <1.0% | |
Frequency Response | 25Hz - 250Hz |
Signal-to-Noise Ratio | >80 dB |
Channel Separation | - |
Shipping Weight | 7.2 Lbs. (3.26 Kg.) |
Dimensions | L11.81" x W7.64" x H2.28" 30cm x 19.4cm x 5.8cm |