Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein
Topthema: Pure Eleganz
Topthema: Raumakustik verbessern - Schallabsorber einsetzen

Kategorie: Endstufen

Ausstattungsliste: Audio Research REFERENCE 150 SE

Ausstattung & technische Daten
Tecnical Details
POWER OUTPUT 150 watts per channel continuous from20Hz to 20kHz. 1kHz total harmonic distortion typically 0.6% at 150 watts, below 0.03% at 1 watt. Approximate actual power available at
(Note that actual power output is dependent upon both line voltage and
POWER BANDWIDTH (-3dB points) 5Hz to 80kHz.
FREQUENCY RESPONSE (-3dB points at 1 watt) 0.5Hz to 120 kHz.
INPUT SENSITIVITY 2.0V RMS BAL for rated output. (24 dB Bal gain into 8 ohms.)
INPUT IMPEDANCE 300K ohms Balanced.
OUTPUT POLARITY Non-inverting. Balanced input pin 2+ (IEC-268).
OUTPUT TAPS 16 ohms, 8 ohms, 4 ohms.
OUTPUT REGULATION Approximately 0.6dB 16 ohm load to open circuit (Damping factor approximately 14).
SLEW RATE 13 volts/microsecond.
RISE TIME 2.0 microseconds.
HUM & NOISE Less than 0.1mV RMS – 114dB below rated output (IHF weighted, input shorted).
POWER SUPPLY ENERGY STORAGE Approximately 1040 joules.
POWER REQUIREMENTS 105-125VAC 60Hz (210-250VAC 50Hz) 730 watts at rated output, 900 watts maximum, 420 watts idle.
TUBES REQUIRED 2 – Matched quad KT150 – Power Output; 4 – 6H30 Driver.
DIMENSIONS 19"(48.3cm) W x 83⁄4" (22.2cm) H x 191⁄2" (49.5cm) D. Handlesextend 11⁄2" (3.8cm) forward.
WEIGHT 75lbs. (34.2kg) Net; 90lbs. (41kg) Shipping.