„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Hifi sonstiges
Ausstattungsliste: Creek Sequel-mk4
| Specification | |
| Type | Plug-in Phono Pre-Amplifier |
| Input Impedance | 47k Ohms |
| Cartridge compatibility | Medium to high output range MM, from 2.2mV to 6.5mV |
| Power output @ 1% THD | >120 Watts into 8 Ohms, both channels driven (31V RMS) Low output MM or high output MC cartridges from 0.8mV to 2.2mV - 47k Ohms input impedance only |
| Frequency Response | 10 Hz to 20 kHz +/- 0.5dB |
| Signal to noise ratio | >80dB at 40dB gain or >70dB at 50dB gain |
| THD | <0.005% |
| Maximum output | 10V RMS, limited by its regulated power supply voltage |
| Switchable options | Piano key (DIP) switch on-board selects the following |
| Gain 1 | 40dB (x100) for medium to high output MM |
| Gain 2 | 50dB (316) for high output MC and low output MM |
| Capacitance | 100pF or 200pF |
| Low Frequency filter | RIAA flat or IEC low frequency 20Hz roll-off (7950 µs) |
|
262-2556
hifisound Lautsprechervertrieb |




