Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Krix PHOENIX MK2
Specification | |
Frequency Range | 35Hz-40kHz in room response |
Power Handling | 50 – 200 Watts RMS recommended amplifier power |
Sensitivity | 91dB for 2.83 volts at 1 metre |
Impedance | Nominally 6 Ohms (minimum 3.5 Ohms) |
Configuration | D’Appolito, 2-way |
Enclosure Type | Bass reflex, rear vented with internal X bracing |
Low Frequency Driver | Dual nominal 165mm (6½”) laminated polypropylene cone. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilization ring for low distortion |
High Frequency Driver | 26mm (1″) dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion |
Input Terminals | Dual gold plated bi-wire binding posts (bi-wireable, bi-ampable) |
Dimensions | 950mm high x 195mm wide x 295mm deep (including feet) |
Weight | 18kg each |