Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Tannoy Revolution Signature DC6
| Specifications | |
| PERFORMANCE | |
| Recommended amplifier power | 20 - 150 Watts RMS |
| Continuous power handling | 75 Watts RMS |
| Peak power handling (Watts) | 300 |
| Sensitivity (2.83 Volts @ 1m) | 88 dB |
| Nominal Impedance (Ohms) | 8 |
| Frequency response | 46Hz - 35kHz (-6dB) |
| Dispersion | 90 degrees conical |
| DRIVE UNITS | |
| Dual Concentric™ High Frequency | 25mm (1.00”) titanium dome with Tulip WaveGuide™ |
| Dual Concentric™ Low Frequency | 150mm (6.00”) treated paper pulp cone with rubber surround and 44mm (1.75”) edge wound voice coil |
| CROSSOVER | |
| Crossover Frequency | 1.8kHz |
| Crossover Type | Passive low loss 2nd order LF, 1st order HF |
| CABINET | |
| Enclosure type | Front ported |
| Dimensions (inc grille) H x W x D | 365 x 226 x 225mm (H x W x D ex. grille) 14.37 x 8.90 x 8.86” (H x W x D ex. grille) |
| Volume | 10.8L 0.381 cu. ft. |
| Weight | 7.2kg 15.87lbs |
| Finish | Light oak and Espresso |
|
305-2128
MD Sound GmbH & Co. KG |



