488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
489_23584_2
Topthema: Träume werden wahr
Standlautsprecher · ESS AMT-1 D Revival
Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Kind DD+3600
Ausstattung & technische Daten
| General | |
| Number of amplifier channels | 2 |
| Total burst power all channels | 3600 W |
| Max output power single channel EIAJ test standard, 1 kHz, 1% THD | |
| 2 ohms | 1800 W |
| 4 ohms | 1000 W |
| 8 ohms | 550 W |
| Hi-Z 70 V (note 1) | - |
| Hi-Z 100 V (note 1) | - |
| Max output power bridged EIAJ test standard, 1 kHz, 1% THD | |
| 4 ohms | 3600 W |
| 8 ohms | 2000 W |
| Max output votage / current | 99 V / 42 A |
| Protection features | Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection |
| Amplifier audio performance | |
| Gain, selectable | 26 dB, 29 dB, 32 dB (factory set), 35 dB, 38 dB, 41dB, 44 dB |
| Input sensitivity @ 4 ohms | 1.59 V |
| Max input level | 20 dBu |
| Frequency response | 20 Hz - 20 kHz (1 W @ 8 Ohm - +/- 0.5dB) |
| S/N ratio (20 Hz - 20 kHz) | >104 dBA |
| Output circuitry | Class D |
| Input impedance | 10k balanced |
| THD+N | <0.3% from 1W to 0.5dB below clip (typically <0.1%) |
| Front panel | |
| Indicators | (LED) Active, Protect, Hi temp, DSP option, signal out -35 dB, -20 dB, -10 dB, Limiter |
| Controls | Mains switch, Gain control (per channel) |
| Maintenance | Removable dust filter holder |
| Rear panel | |
| Audio signal input connectors (per channel) | XLR male, XLR female combo jack 6.3 (balanced) |
| Loudspeakers output connectors | Neutrik Speakon NL4MD (per channel) |
| Networking | Data port hole for DSP option |
| AC mains cordset / chassis connector | Schuko CEE 7/7 16 A / Direct |
| Controls | (switch) Gain, HPF, Link/Bridge, Analog or AES3 |
| AC mains power | |
| Power supply | Universal regulated switch mode with PFC (Power Factor Correction) |
| Operating voltage | 100-240 V +/-10%, 50-60 Hz |
| Power factor correction | >0.95 @ mains power >500 W |
| Current draw | @ 230 V / @ 115 V |
| Idle | 0.6 A / 0.7 A |
| 1/8 of max output power@ 4 ohms | 2.0 A / 3.4 A |
| 1/4 of max output power@ 4 ohms | 3.3 A / 6.1 A |
| Thermal | Operating temperature 0° - 40° C / 32° - 104° F |
| Dissipation and cooling | Fan, continuosly variable speed, temperature and load current controlled, front to rear airflow |
| Idle | 220 BTU/h | 55 kcal/h |
| 1/8 of max output power@ 4 ohms | 433 BTU/h | 109 kcal/h |
| 1/4 of max output power@ 4 ohms | 646 BTU/h | 163 kcal/h |
| Chassis construction | 1.2 mm steel chassis with added 1.5mm steel front pannel and removable dust filter holder with rear support ears |
| Dimensions | W 483 mm / 19", H 89 mm / 2 RU, D 455 mm / 17.9" from front mounting rails |
| Weight | 10 kg / 22lb |
