Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Millennia HV-35P
Specification | |
Type | Portable Microphone Preamp |
Minimum Gain | 14.5 dB, 1dB with Pad |
Maximum Gain (continuously variable) | 60 dB (70 dB in Ribbon Mode) |
Frequency Response (-3 dB) | < 10 Hz to > 200 kHz |
typical -1.0 dB @ 10 Hz | |
typical -1.5 dB @ 200 kHz | |
Noise (60 dB Gain, 10 Hz - 30 kHz, Inputs common) | -130 dB EIN |
Total Harmonic Distortion + Noise (35 dB Gain, 10 Hz - 20 kHz bandwidth, +24 dBu Out) | < .003%, Typical < .001% |
Intermodulation Distortion (50 Hz & 7 kHz) 35 dB Gain | < .0006% +12 dBu Out |
< .001% +20 dBu Out | |
Phase Response (35 dB Gain, 50 Hz - 20 kHz bandwidth, +27 dBu Out) | < 2 degrees deviation |
Common Mode Rejection Ratio (35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.) | > 65 dB, Typ > 85 dB |
Slew Rate (35 dB Gain, +24 dBu Out) | > 25 Volts per microsecond |
Maximum Input Level (20 Hz - 40 kHz) | +12dBu @ 0.02% THD+N |
+18dBu @ 0.02% THD+N with pad | |
Maximum Output Level (20 Hz - 40 kHz) | 1 kHz @ 35dB of gain, THD+N is: |
< 0.001% at +26dBu output | |
< 0.05% @ +28 dBu output. | |
Phantom Input Impedance (1 kHz) | 2,210 ohms |
Output Impedance | 24.3 Ohms (x2) |
Phantom Powering | 48V dc +/- 2V dc |
Dimensions/Shipping Weight | 5.67" W x 1.69” H x 8.19” D, 3 lbs. |