698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
699_24856_2
Topthema: Standlautsprecher · Neuron Acoustic Trivion
1825 Tage Musik
Zu den spannendsten Newcomern im Bereich Lautsprecher zählt ganz klar Neuron Acoustic. Was wir bisher aus Heilbronn gehört haben, hat uns restlos begeistert.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Millennia LOCi
Ausstattung & technische Daten
| Specification | |
| Type | Analog Legacy Phonograph Playback System |
| PHONOGRAPHIC PREAMPLIFIER & GENERAL | |
| Input Amplifier Signal Path | All Discrete J-FET True Differential Gain Amplifier (IMA-01) |
| EQ Amplifier Signal Path | All Discrete 50V J-FET Servo (FSA-03) |
| Frequency Response, +/- 0.5 dB | 10 Hz to 100 kHz, comps & filters out, + 45 dB gain |
| Common Mode Rejection Ratio | -75 dBu typical, 10 Hz - 50 kHz, 1.0V P/P CM |
| Maximum Input / Maximum Output | +23 dBu flat / + 26 dBu RIAA in |
| Maximum System Gain | 60 dB Nominal. Higher upon request. |
| Phono Input Impedance | User selectable. Factory Stock: 47.5k ohms & 270 pF |
| Output Impedance | 49.9 ohms |
| Broadband Noise (no weighting filters) | Better than -125 dBu EIN, flat. -98 dBu EIN, RIAA in |
| Three-pin XLR Polarity | Pin 2 = positive polarity, Pin 1 = ground |
| PHONOGRAPHIC COMPENSATION & CORRECTIVE FILTERS | |
| Maximum Filter Boost & Cut | +/- 10 dB (21 step detented) |
| Notch Filter "Q" (Quality Factor) | Q = 1.0 |
| Low Frequency Compensation (Hz) | 200, 250, 300, 400, 500/RIAA, 700/USER |
| High Frequency Compensation (dB @ 10 kHz) | -5.0, -7.0, -9.5, -11.5, -13.7/RIAA, -16.0/USER |
| Low Filter Fixed Frequencies (Hz) | 20, 35, 60, 100, 180, 260 |
| High Filter Fixed Frequencies (kHz) | 1.0, 2.0, 3.0, 5.0, 8.0, 12.0 |
| Peak/Shelf Selection on all Filters | Yes (4) |
| Bypass Selection on all Bands | Yes (8) |
| ELECTRO-MECHANICAL | |
| Power Consumption | 60 Watts, nominal |
| Power Requirements | 100VAC to 240VAC, 50/60Hz, user selectable |
| Fuses (external, 2 required) | 2 ea. 1.0A with 100-120VAC mains (5x20mm) |
| 2 ea. 500 mA with 200-240VAC mains (5x20mm) | |
| Internal Power | +/-50VDC +/-25VDC +5VDC |
| Dimensions | 19.0” W x 15.0" D x 3.5" H (2u rack mount) |
| Net Weight | approximately 26 pounds |
