Kategorie: Profi- / Musiker-Equipment

Ausstattungsliste: Yamaha TF3

Ausstattung & technische Daten

Type	Digital Mixing console
Outline
Fader Configuration	24 + 1 (Master)
Mixing Capacity	Input Channels 48 (40 mono + 2 stereo + 2 return)
Aux Buses 20 (8 mono + 6 stereo)
Stereo Buses 1
Sub Buses 1
Input channel functions	8 DCA Groups
I/O	Eingänge 24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
Ausgänge 16 (XLR)
Expansion slots 1
On-board processors	DSP 8 Effects + 10 GEQ
General specifications
Sampling frequency rate	Internal 48 kHz
Signal delay	Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader	100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders
Total harmonic distortion	Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)
Frequency response	+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Dynamic range	110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Hum & noise level	Equivalent input noise –128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)
Residual output noise –85 dBu, ST master off (Measured with an A-Weight filter)
Crosstalk	–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Power requirements	100–240 V 50/60 Hz
Power consumption	110 W
Dimensions	W 716 mm (28.2in)
H 225 mm (8.9in)
D 599 mm (23.6in)
Net weight	17.0 kg (37.5lb)
Accessories	Quick Guide, Power Cord, Nuendo Live
Options	Expansion Card, Foot Switch (FC5)
Others	Operating temperature range: 0–40 °C
Storage temperature range: -20–60 °C