696_24841_2
Topthema: Audio System X-100.9 MDSP-BTA – 9 Kanal Endstufe mit 13 Kanal DSP
Starkes Upgrade
Audio System hat seiner modernsten DSP-Endstufengeneration eine kleine Überarbeitung gegönnt, die in der Praxis einen großen Unterschied macht.
>> Mehr erfahren>> Alle anzeigen
698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Car Hifi Endstufe 4-Kanal
Ausstattungsliste: Arc Audio SE 4100
Ausstattung & technische Daten
| Features | |
| Audiophile sound quality based design | |
| Designed by Robert Zeff | |
| Class A/B switching design | |
| Microprocessor controlled design | |
| Microprocessor controlled Code based flashing diagnostics | |
| Concealed adjustment controls | |
| Open architecture adjustable crossovers on all channels HP/BP/LP/FP | |
| 12/24Db per octave selectable crossover slopes on all channels | |
| Internal chassis force cooled speed controlled fan for optimum cooling | |
| Hi/Low level balanced switchblade RCA inputs for maximum system integration | |
| RJ45 Ethernet input connections for true balanced input connections | |
| Block type terminal connections | |
| 256 color user selectable illumination circuit | |
| Combined Bias circuit and temperature regulation circuit to regulate bias and lower THD at any point in total thermal cycle | |
| Microprocessor high voltage power supply allows the amplifier to optimize power output at different ohm loads without the loss of efficiency or sound quality | |
| Vdrive based preamp stage improves efficiency lower internal signal loss | |
| Hand picked output devices used on all SE amplifiers. | |
| Specifications | |
| 4 Channels @ 4 ohms | 65 Watts |
| 4 Channels @ 2 ohms | 110 Watts |
| 2 Channels @ 4 ohms (Bridged) | 220 Watts |
| 2 Channels @ 2 ohms (Bridged) | 145 Watts |
| Frequency Response | 4Hz - 100kHz |
| Crossover Range | 30Hz - 500Hz |
| Crossover Range X10 | 300Hz - 5500kHz |
| Bass Boost | 0 - 15dB @ 20Hz - 80Hz |
| S/N Ratio | 93 dB (RCA In) |
| Input Sensitivity (Low) | .3V - 4V |
| Input Sensitivity (Bal) | .4V - 8V |
| Max current draw | 79A @ 540 Watts 20% THD |
| Idle Current | 3 Amp |
| Fuse | 2 x 40 Amps |
| Dimensions | 15.5" (L) x 8.0" (W) x 2.5" (H) |
