Vor gut 40 Jahren erblickte der Bausatz „Monitor 1“ der Firma Hifi Sound das Licht der Welt. Wir haben den Bausatz wieder aufleben zu lassen.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Hifi sonstiges
Ausstattungsliste: Pass Labs XVR-1
| Technical Specifications | |
| Input Impedance, Bal. (Kohm) | 66 |
| Maximum Input, Bal. (Vrms) | 30 |
| Maximum Output, Bal. (Vrms) | 30 |
| Input Impedance, SE (Kohm) | 44 |
| Maximum Input, SE (Vrms) | 15 |
| Maximum Output, SE (Vrms) | 15 |
| Input CMRR | -60 dB @ 20 KHz |
| Crosstalk | -80 dB @ 20 KHz |
| Output Impedance | 200 ohm balanced differential |
| 100 ohm single-ended | |
| Gain, Input to Output (Low Q) | XLR = 5.6 dB, RCA out = -0.4 dB |
| Gain, Input to Output (Med Q, 6/12 dB/oct) | XLR = 8.6 dB, RCA out = 2.6 dB |
| Gain, Input to Output (Med Q, 18/24 dB/oct) | XLR = 13.4 dB, RCA out = 7.4 dB |
| Gain, Input to Output (Hi Q, 6/12 dB/oct) | XLR = 11.6 dB, RCA out = 5.6 dB |
| Gain, Input to Output (Hi Q, 18/24 dB/oct) | XLR = 17.6 dB, RCA out = 11.6 dB |
| All Pass Bandwidth (Low Pass) | -0 @ 10 Hz, -0 @ 100,000 Hz |
| All Pass Bandwidth (High Pass) | -1 @ 10 Hz, -0 @ 100,000 Hz |
| Distortion + Noise (0.2 V to 30 V balanced, 20 Hz to 20 KHz) | 0.05% |
| Distortion + Noise (3 V balanced, 1 KHz) | 0.002% |
| Filter characteristic (High Pass) | 6/12/18/24 dB/oct, 22 Hz to 18 KHz in 39 steps |
| Filter characteristic (Low Pass) | 6/12/18/24 dB/oct, 22 Hz to 18 KHz in 39 steps |





