616_24538_2
Topthema: Einzeltest: Henry Audio DA 256
Open-Source-High-End
Seit meinem ersten externen D/A-Wandler (ein günstiges Gerät von Musical Fidelity) bin ich angefixt. Egal, ob man einem alten CD-Spieler klanglich auf die Sprünge helfen möchte oder ob man einfach etwas mehr Klang sucht: Ein DAC kann Wunder wirken.
>> Mehr erfahren>> Alle anzeigen
599_24448_2
Topthema: Soundbar Q65H von TCL
Soundbar gut und günstig
Die Q65H ist die günstigste Soundbar aus TCLs Q-Serie. Sie ist bereits unter 300 Euro erhältlich und leistet dafür erstaunliches.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Audioengine HD3
Ausstattung & technische Daten
| Technical specification | |
| Type | 2.0 powered multimedia speaker system |
| Amplifier type | Dual analog class A/B monolithic |
| Power output | 60W peak power total (15W RMS / 30W peak per channel), AES |
| Drivers | 2.75″ aramid fiber woofers, 3/4″ silk dome tweeters |
| Inputs | 3.5mm stereo mini-jack, stereo RCA, USB, Bluetooth |
| Outputs | RCA variable line-out, 3.5mm mini-jack headphone out |
| Mains voltages | 110-240V 50/60Hz auto-switching |
| SNR | >95dB (typical A-weighted) |
| THD+N | <0.05% at all power settings |
| Crosstalk | <50dB |
| Frequency response | 65Hz-22kHz +/-2.0dB |
| Freq. response w/bass reduction switch selected | 100Hz-22kHz +/-2.0dB (-5dB down) |
| Input impedance | 5K ohms unbalanced |
| Protection | Output current limiting, thermal over-temperature, power on/off transient protection |
| Headphone amp specifications | |
| Headphone amp type | OPA2134 |
| Full-scale headphone output level | 2.0V RMS |
| Output impedance | 2 ohms |
| Recommended headphone impedance range | 10 ohms to 10K ohms |
| Bluetooth specifications | |
| Internal D/A converter | PCM 5102 |
| Input bit depth | 24-bits, upsampled |
| Bluetooth receiver type | Bluetooth 5.0 audio |
| Supported codecs | aptX HD, aptX low latency, aptX, AAC, SBC |
| Wireless operation range | Up to 100ft (30m) typical |
| Input data rate | Determined by Bluetooth |
| Wireless latency | ~30 milliseconds (ms) |
| USB specifications | |
| Connector type | Micro-USB |
| USB device class | USB 1.1 or above |
| Internal D/A converter | PCM 5102 |
| Input bit depth | 24-bits, upsampled |
| Input data rate | 44.1KHz/48KHz |
| Weights and measures | |
| Dimensions (each) | 7″(H) x 4.25″ (W) x 5.5″ (D) |
| Weight (LEFT speaker) | 1.8Kg/4lbs |
| Weight (RIGHT speaker) | 1.5Kg/3.4lbs |
| Materials and construction | |
| Materials and construction | 18mm thick MDF cabinets with real wood veneer |
| 3/4″ (20mm) silk dome tweeters with neodymium magnets | |
| 2.75″ aramid fiber woofers with advanced voice coils | |
| Finish options | |
| Finish options | Satin Black |
| High-Gloss White | |
| Walnut | |
| Cherry | |
