Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: IK Multimedia iLoud Micro Monitor
| Specification | |
| Type | 2-way active, bi-amped studio monitor |
| Frequency response (-10dB) | 45Hz - 22kHz |
| Crossover frequency | 3kHz |
| Tweeter | 3/4" silk dome, neodymium magnet |
| Woofer | 3" high-rigidity custom composite material |
| Maximum SPL @ 50cm (with two speakers playing, averaged sinewave from 100 Hz to 10 kHz) | 107dB |
| Number of amplifiers | 4 |
| Amplifiers type | High Efficiency Class-D |
| Total output power (both speakers) | 70W (peak) - 50W RMS |
| Low frequency output power (single speaker) | 18W RMS |
| High frequency output power (single speaker) | 7W RMS |
| Acoustic settings | high shelf (0dB or -3dB from 4kHz up); low shelf (0dB or -3dB from 250Hz down); desktop (+3.5dB between 1kHz and 10kHz and -1dB below 400Hz) |
| System total latency (analog input) | 1.02 ms |
| System total latency (Bluetooth input) | 155 ms (depends on host implementation, tested on iPhone 6S / iOS 10.0.1) |
| High performance Bass-Reflex port | yes |
| Totally DSP controlled | yes |
| Bluetooth® compatible with A2DP protocol | yes |
| Connectors | 2 x RCA input (cable included); TRS 1/8" stereo input; 4-pin speaker connector (cable included) |
| Size | 180mm/7.09" x 135mm/5.31" x 90mm/3.54" |
| Weight | 920g/32.45oz (left speaker) |
| 800g/28.22oz (right speaker) | |
| 1,720g/60.67oz (left + right speaker) | |




