Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Surround
Ausstattungsliste: Aerial Acoustics 7CC
Specification | |
Frequency Response | 55 Hz – 25 kHz +/- 2 dB |
Sensitivity | 87 dB at 2.83 Vrms and 1.0 meter on axis |
Impedance | 4 ohms nominal, 3 ohms minimum, low reactance |
Power Requirement | 25 to 300 watts (8 ohm rating) recommended |
Woofers | 2 x 6.7″ long-stroke design with aluminum cones, large voice coils, large magnets and cast frames |
Midrange | 5″ cast frame design with strong acceleration-factor dual magnets and special Papyrus cone |
Tweeter | 1″ woven soft ring dome with dual magnets, non-resonant chamber, machined aluminum face plate |
Crossovers | 600 Hz and 3.5 kHz. Premium components, polypropylene capacitors, silver solder, Teflon wiring |
Controls | 2 x 3-position rotary switches for fine midrange and tweeter adjustment and boundary compensation |
Cabinet | Inert construction with stressed multi-layer curved walls, extensive bracing and wool insulation |
Baffle | 0.5″ thick inert aluminum baffle for midrange and tweeter mounting |
Grille | Curved grille with magnetic mounting |
Finish | Architectural veneers. 4 layer priming and 10 layer hard hand-polished high gloss finish |
Connectors | 4 binding posts with jumpers for single-wire, bi-wire or bi-amp use |
Hardware | 4 adjustable spikes with black spike covers to protect furniture |
Dimensions | 23.6 x 8.0 x 11.9″ deep including grille (600 x 204 x 302) |
Weight | 39 pounds each |