Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: ENGL Invader II E642II
Specification | |
Type | Amplifier |
Features | 4 Channels: Clean, Crunch, Lead 1, Lead 2 |
All Tube Head | |
2 Tube buffered FX Loops (each with Balance control) | |
Noise Gate | |
Master A/B | |
Power Tube Monitor | |
Connection Port for the optional ENGL Z16 Sound Wizzard Module | |
Ground Lift Switch | |
MIDI: MIDI in / MIDI thru | |
Engl Midi-Footcontroller Phantom Power Switch | |
MIDI Channel Assignment and Controller Enable Switches | |
Write / Copy (for MIDI programming) | |
all functions accessible on the front panel are MIDI programmable | |
S.A.C.: Serial Amp Control | |
Sound Options | Sound |
Hi Gain | |
Sound Wizzard Module (optional) | |
Controls | Gain (for each Channel) |
3-Band EQ (for each Channel) | |
Volume (for each Channel) | |
Presence | |
Depth Punch | |
Master A | |
Master B | |
Noise Gate Threshold Level | |
Low / High Gain Volume Ratio Control (for each Channel) | |
FX Loop I Balance | |
FX Loop II Balance | |
Outputs | Poweramp Output (1 x 4 Ω, 1 x 8 Ω, 1 x 16 Ω, 2 x 8 Ω ||, 2 x 16 Ω ||) - Pre Output - Line Out |
Footswitch | Z4 (Channels) |
Z9 (Master A/B, Hi Gain, Noise Gate, Amp Mute, Sound, FX Loop) | |
Z12 | |
Z15 | |
Preamp Tubes | 4 x Engl ECC83 / 12AX7 |
Output Tubes | 4 x Engl KT77 |
Output Wattage | 100 W |
Dimensions | 71 x 27 x 29 cm |
Weight | 22.5 kg |