390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Manley CORE
Ausstattung & technische Daten
| Specification | |
| Type | Reference Channel Strip |
| Preamplifier Audio Path | ALL-TUBE preamplifier audio path using 1 x 12AX7 for gain and 1 x 6922 White Follower |
| Balanced Transformer Coupled XLR Microphone Input Impedance | 1200 Ohms |
| Balanced XLR Line Input Impedance | 10 kOhms |
| Unbalanced 1/4" Direct Input Impedance | 10 Meg Ohm |
| Hi-current drive Direct XLR output Impedance | 50 Ohms |
| Attenuator | Silent conductive plastic INPUT attenuator |
| Microphone preamp high pass filter | starting at 120Hz with a 6dB/8va slope |
| Compressor Maximum GAIN REDUCTION | 16 dB |
| Compressor ATTACK time | 60ms slowest CCW, 30ms at 12:00, 5ms fastest CW for 6dB compression |
| Compressor RELEASE time | 1.5s slowest CCW, 1s at 12:00, 100ms fastest CW from 6dB compression |
| Maximum Input Mic input (Low Gain Setting) | -5 dBu or 435mV RMS @ 0.5% THD |
| Maximum Input Mic input (High Gain Setting) | -25 dBu or 44 mV RMS @ 0.5% THD |
| Maximum Input Line input (Low Gain Setting) | +13 dBu or 3.5V RMS @ 0.5% THD |
| Maximum Input Line input (High Gain Setting) | -8 dBu or 300mV RMS @ 0.5% THD |
| Maximum Input Direct input (Low Gain Setting) | +24 dBu or 12V RMS @ 0.5% THD |
| Maximum Input Direct input (High Gain Setting) | +17 dBu or 5.5V RMS @ 0.5% THD |
| Maximum Input Insert return | +20 dBu or 7.8V RMS @ 0.5% THD |
| Maximum Preamp Output (Insert Send) | +35 dBu or 43V RMS @ 0.5% THD |
| Maximum Preamp Output (Insert Send) | +22 dBu into 600 Ohms |
| Maximum Main Output | +20 dBu |
| Insert Send output impedance | 50 Ohms |
| Insert Return input impedance | 13 kOhms |
| Main Output Impedance | 50 Ohms |
| Direct Output Headroom (referenced to +4 dBv) | 31 dB |
| Main Output Headroom (referenced to +4 dBv) | 16 dB |
| Dynamic Range | >90 dB |
| Frequency Response | 10 Hz to 20 kHz ±0.5 dB |
| LED | Large LED illuminated VU METER |
| Meters | Meters switch to read Direct Output (1) from preamp, Output (2) from Main Out, or Compressor Gain Reduction |
| THD & Noise (1kHz @ +4 dBm) | 0.02% at Low Gain setting |
| Noise Floor (Gain set to minimum) | -70 dB wideband typical |
| Gain via Microphone Input | 40 or 60 dB |
| Gain via Line Input | 20 or 40dB |
| Maximum Gain of EQ & Limiter section | 10 dB |
| AUTOMUTE warmup delay | 30 Seconds |
| Power consumption | 35 watts |
| Operating mains voltage | 90 to 254 VAC (internal universal supply) |
| Mains Voltage Frequency | 50-60Hz |
| Dimensions | 19" x 3 1/2" x 7" (occupies 2u) |
| Unit Weight | 8.3 lbs. |
