Die 800er Serie von Philips ist preislich deutlich unter den edlen OLED+ Modellen angesiedelt und erfreut sich daher hoher Beliebtheit. Dennoch bringt das brandneue 2025er Modell OLED810 einen Großteil der Technologie aus der Topserie mit.
>> Mehr erfahren>> Alle anzeigen
Zwischen dem 08. Dezember 2025 und dem 07. Januar 2026 bietet der Hersteller aus Schwäbisch Gmünd eine 0%-Finanzierung für Einkäufe zwischen 200 und 8.000 Euro an.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Atmasphere S-30
| Features | |
| Balanced Differential Design® | |
| Class-A operation | |
| Patented Circlotronic® direct-coupled (OTL) output stage | |
| Dual-mono chassis construction | |
| Automatic bias - no adjustment needed | |
| Built in VU meter for tube and output monitoring | |
| Easily monostrapped for greatly increased power | |
| Uses only one gain stage for supreme clarity of sound | |
| Proprietary precision components used throughout | |
| Low-noise "star" grounding topology | |
| Fully hand-wired point-to-point electronics - no circuit boards! | |
| Stable with all input and load conditions | |
| Exclusively uses Octal-Triode based vacuum tubes | |
| Classic open chassis construction with Wrinkletex™ finish | |
| Three-year general coverage warranty, one year warranty on output tubes | |
| Specifications | |
| Output power | 30 watts per channel into 8 Ω load |
| 45 watts per channel into 16 Ω load | |
| Impedance | Input Impedance: 100 KΩ single-ended, 200 KΩ balanced |
| Output Impedance: 7 Ω | |
| Input | 3 V sensitivity |
| RCA and XLR true balanced input | |
| Tube complement | 10 x 6AS7G output tube |
| 6 x 6SN7 driver tube | |
| Gain | 23dB ( for 8 Ω ) |
| Power Bandwidth | 2Hz-75KHz within ½ dB |
| Frequency response | ( 1 watt, open loop ) 20 Hz squarewave Tilt; unmeasureable 1Hz-200KHz within 3 dB |
| Hum and noise | Less than -75db below 1 watt, -95db below full power (30 watts) |
| Distortion | Total Harmonic Distortion ( THD ) typically 1% at full power |
| Intermodulation ( IM ) distortion typically under .04% at full power | |
| Phase shift less than 1° @ 20KHz | |
| Output section | 600 V/µs |
| Feedback | 2 dB |
| Power consumption | 400 watts |
| Dimensions | 13" deep x 17" wide x 8" tall ( 33 x 43 x 20 cm ) |
| Weight | ( without tubes ) 24 lbs ( 10.9 kg ) |
| Warranty | Three year general coverage |
| One year for output tubes | |



