Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
Mit einem Erfahrungsschatz aus 5 Jahrzehnten Symphonic Line hat Rolf Gemein längst seine Klang-Signatur gefunden
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Creek Evolution 100P
| Technical Specification | |
| Power Output | >110 Watts into 8 Ohms |
| >170 Watts into 4 Ohms | |
| >400 Watts into 4 Ohms mono | |
| Continuous Current | >8.5 A Stereo / 16 A Bridge Mono |
| Max Current | >26 Amps, Stereo |
| >50 Amps, Bridged Mono | |
| Current bursts into 0.5 Ohm load | |
| Output Impedance | <0.05 Ohms @ 1KHz |
| THD | < 0.002% 20Hz – 20KHz |
| SNR | >102dB |
| Frequency Response | 10Hz – 100KHz +/- 2dB Line |
| Gain | 33.3dB (x46) |
| Input Sensitivity | 650mV |
| Input Impedance | 47k Ohms unbalanced |
| 30k Ohms balanced | |
| Crosstalk | -80dB at 1Khz |
| DC Offest | < +/-10mV |
| Slew Rate | >30 V per uS |
| Inputs | RCA unbalanced – XLR balanced |
| Outputs | 2 Pairs of high quality binding posts |
| Operating Voltages | 110V/230V Switchable |
| Consumption (at idle) | <20 Watts (no standby) |
| Consumption (at full power) | 500 Watts |
| Weight | 9Kgs |
| Dimensions | 430x60x280mm W/H/D |
|
262-2556
hifisound Lautsprechervertrieb |



