698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
691_24536_2
Topthema: Aktiv-Standlautsprecher · Loutd musegg
Kaufen oder leihen
„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Phono Vorverstärker
Ausstattungsliste: VAC Renaissance Mk V
Ausstattung & technische Daten
| Technical specification | |
| Gain | 10 dB |
| Frequency Response | Flat over audio band –3 dB bandwidth 5 Hz – 210 kHz |
| Inputs | 2 sets balanced/RCA selectable inputs |
| 1 MM and 1 MC (or additional RCA line input if phono is not fitted) | |
| Outputs | 1 set RCA |
| 1 set balance XLR (EIA “pin 2 hot” studio standard) | |
| Tubes | 2x 7308, 6922, E88CC, ECC88, or 6DJ8 twin triodes |
| Absolute Phase | Correct from all inputs to all outputs |
| THD | <0.009% @ 1 kHz, 1 V RMS |
| Maximum Output | < 8 V RMS |
| Output Impedance | > 150 ohms, 20 Hz - 20 kHz, static (i.e., not dependent upon feedback) |
| Maximum Input | Infinite signal (attenuation precedes the gain circuitry) |
| Recommended Output Load | > 300 ohms |
| Power | External power supply, detachable umbilical cable, detachable IEC power cord |
| Voltage | May be factory configured for operation at 100, 120, 220, or 230/240 volts |
| Power Cord | Detachable power cord, standard IEC power receptacle |
| Remote Control | included |
| Illumination | Illuminated logo may be switched to bright, dim, or off |
| Finish | Hand-rubbed gold-flake gloss black lacquer with chrome knobs standard. |
| Hand-rubbed metallic gloss silver lacquer with chrome knobs special order with additional cost. | |
| Dimensions (H x W x D) | Audio chassis (not including knobs and connectors): 4" x 18" x 16" |
| Power supply (not including connectors): 4.3" x 6" x 13" | |
| Shipping Weight | 44 lbs. |
| Phono Stage (optional) | |
| Tubes | 3x 12AX7 |
| Gain | 44 dB MM |
| 62 or 68 dB MC (switchable on units made after September 1, 2017) | |
| Frequency Response | RIAA standard +/- 0.2 dB (20 Hz - 20 kHz) -3 dB bandwidth 10 Hz - • 80 kHz |
| Channel Separation | > 77 dB @ 1 kHz |
| MC Load Impedance | selectable, 470, 300, 250, 200, 150, and 100 ohms |
| Overload | 117MV @ 1kHz = 8 volts RMS output; 460MV @ 10kHz |
| Residual Noise | Less than 3MV at output (s/n ratio greater than approx. 69db) |
