699_24856_2
Topthema: Standlautsprecher · Neuron Acoustic Trivion
1825 Tage Musik
Zu den spannendsten Newcomern im Bereich Lautsprecher zählt ganz klar Neuron Acoustic. Was wir bisher aus Heilbronn gehört haben, hat uns restlos begeistert.
>> Mehr erfahren>> Alle anzeigen
698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Linn Majik-I
Ausstattung & technische Daten
| Integrated amplifier | |
| Technical Specifications | |
| Date of Introduction | October 2007 |
| Type | Integrated amplifier |
| Connector types | |
| Headphones | 3.5 mm jack |
| Aux input | 3.5 mm jack |
| Line outputs | RCA Phono |
| Tape outputs | RCA Phono |
| Line inputs | RCA Phono |
| Speaker outputs | 4mm Banana / Binding Post |
| Input impedance | |
| MM phono input | 48 kΩ 68 pF |
| Line inputs | 10 kΩ |
| Aux input | 100 kΩ |
| Input voltage | |
| MM phono input | 70 mV peak @ 1 cm/sec 1kHz |
| Line inputs | 8.5 V peak, 6 V rms |
| Aux input | 4.5 V peak, 3.1 V rms |
| Phono stage gain | |
| MM phono input | +40 dB (x 100) @ 1 kHz |
| Output impedance | |
| Line out | 300 Ω |
| Tape out | 300 Ω |
| Headphones | 11 Ω |
| Output voltage | |
| Line outputs | 8.8 V peak, 6 V rms |
| Tape outputs | 8.8 V peak, 6 V rms |
| Headphones | 8.8 V peak, 6 V rms |
| Output offset | |
| Line outputs | < 2 mV |
| Tape outputs | < 2 mV |
| Headphones | < 2 mV |
| Speaker outputs | < 3 mV |
| Signal-to-noise ratio | |
| Line inputs | Better than -120 dB |
| MM phono input | Better than -90 dB |
| Gain range | -80 dB to +20 dB |
| Gain resolution | 0.5 dB |
| Unity gain volume | 0 dB = volume 80 |
| Dynamic range | 120 dB |
| Damping factor | Greater than 170 |
| Signal level for clipping | 755 mV rms |
| Harmonic distortion | < 0.01% |
| Load tolerance | Unconditionally stable into all loudspeaker loads |
| Frequency response | |
| Pre-amp | 2.5 Hz – 170 kHz (-3 dB) |
| Power amp | 2.5 Hz – 48 kHz (-3 dB) |
| Speaker output voltage | 28.8 V peak |
| Power consumption | |
| Standby | 20 W |
| Operational | 30 W |
| Maximum continuous | 300 W |
| Mains supply voltage (auto-ranging) | 100 – 120 V ac (±10%) 50 – 60 Hz, 220 – 240 V ac (±10%) 50 – 60 Hz |
| Fuse replacement | 250 V, T10 A |
| Dimensions | (H) 80 mm x (W) 381 mm x (D) 355 mm (H) 31⁄8 inches x (W) 151⁄16 inches x (D) 14 inches |
| Weight | 4.9 kg / 10.78 lb |
| Control | 6 control keys on front panel Remote controllable (handset supplied) |
| Finishes | Black and Silver |
